Subject	Could it be a shorted relay, or am I going to end up
Posted by	JumWilmZ(AZ) on June 04, 2008 at 6:13 PM
	This message has been viewed 133 times.
Message	checking the entire harness for shorts? I'm still having the blown Clearance/Illumi fuse issue. 1. I've removed every piece of hardware attached to the harness (That I know of), and inspected the wires visually noticing no problems. 2. I've tested the plugs on the harness for continuity. (Some tested as open, others with some resistance...none shorted completely) 3. I've checked the interior connections to make sure they all are in good shape, and they are. I'm at a loss for what to check next. So, I have a few questions to ask, hopefully you guys and gals have some answers to help me out. Can relays short in a way that would cause this? Where are the relays on this circuit, if any? How do you check a relay? What area/page of the service manual is the schematic for this circuit? Thanks in advance!
Follow Ups	Could it be a shorted relay, or am I going to end up - JumWilmZ(AZ) 18:13:41 06/04/08 I'll try to keep this simple - others may have other - jzack 18:55:06 06/04/08 None of the relays connect to ground..except - twinturbineZ 20:17:52 06/04/08 I hope something jumps out at me soon. - JumWilmZ(AZ) 09:51:17 06/05/08 The only thing that's not disconnected yet is - JumWilmZ(AZ) 09:49:52 06/05/08 So..does it blow as soon as you put the fuse in...or - twinturbineZ 14:14:29 06/05/08 Just when I turn on the parking lights. (n/m) - JumWilmZ(AZ) 14:53:55 06/05/08 when did this start..and what's the last thing you - twinturbineZ 15:15:57 06/05/08 Looks like it was a connector on the door... - JumWilmZ(AZ) 22:00:43 06/05/08 kewl..must have been the window switch illumination - twinturbineZ 00:27:16 06/07/08 You said it only shorts when the parking lights are on? - twinturbineZ 20:20:26 06/04/08
Post a Followup	You cannot reply to this message because you are not logged in.