i just cannot decide witch turbo would be better for my set up. i want a responsive turbo for street/highway useage and very little track useage. please vote and give reason behind your answer. i only want JWT Turbos. dont need to be a dyno king. but i dont want a little more power than the sp500s put out. i dont want to have to build my trans up for crazy HP or have to worry about things breaking after everytime i drive the car. some say just tune the 700s for a desirable HP and others say the 530s for their spool up. then some say i'll be maxing out the 530s. Greg from specialtyZ said both tubos magice psi is 20-21 pounds. im thinking ~450HP to the wheels on pump would be a nice respectable number. i'll have supporting mods for either turbo. take a look when its all said and done. i already have most of everything on this list already (most arent installed just yet): -AshSPEC Dual Intake -3" Down Pipes -3" Test pipes -3" Specialty Z's Cat-back and X-Pipes (no resonators) -AshSPEC ECU -HKS SSQV BOVs -GReddy Profec B Spec II -Nismo Oil Cooler -Nismo Thermostat -AshSPEC Massive SMICs & Air Ducts -Snow Injection with dual 375 nozzles -'95 TT, 5 speed EFI Wiring Harness -PEX Overdrive Water Pump Pulley -Nismo 740cc injectors with 300 Degree Fuel Rails -(2) AEM UEGO Widebands -Billet Filtered Catch Can -Race Cylinder Heads (40P) -JWT 500 series Race Cams & 90-94 Adapters -JWT Heavy Duty Springs -JWT VTC Springs -RPS Max 6 Puck Sprung Hub -RPS Segmented Flywheel -'96 CAS -Mike Smith Manifolds -Built Engine -AshSPEC Radiator, Howe Radiator, Koyo Radiator, or AMS -AshSPEC 2.5" Pipes -Z1 1-Piece Driveshaft if i am forgetting a supporting mod, please let me know
|