Subject	It's possible that your reverse check assembly has failed
Posted by	SeanK (StL) on October 31, 2011 at 8:33 AM
	This message has been viewed 1596 times.
In Reply To	No reverse in 5spd! please help ! posted by lackodeniro on October 30, 2011 at 09:32 PM
Message	Not a big problem and possible to remove and replace with the transmission in the car. Should be about $30. part # 32180-33P03 can be found on "328 Transmission Shiftcontrol" parts sheet. It's located on the drivers side of the transmission as seen here. Held in by 1x 10mm bolt. Mine was stuck in the transmission and required a drop to get enough force on it to remove. Others have had better luck removing it with the transmission in place. You should be able to pull it and verify that both ears of the spring are intact. New left, old/broken right If this part is ok then you might need to dig into the tranny case to figure out what's the problem. Good luck.
Follow Ups	No reverse in 5spd! please help ! - lackodeniro 21:32:28 10/30/11 It's possible that your reverse check assembly has failed - SeanK (StL) 08:33:52 10/31/11 2nd^^ (n/m) - sandmanz32 21:17:55 10/31/11 Re: It's possible that your reverse check assembly has failed - lackodeniro 21:55:47 11/01/11
Post a Followup	You cannot reply to this message because you are not logged in.