Subject	Re: Fuel clamps: any alternatives
Posted by	itsa300zx on September 04, 2025 at 10:42 AM
	This message has been viewed 169 times.
In Reply To	Fuel clamps: any alternatives posted by Mike@ZSpeed on September 04, 2025 at 08:42 AM
Message	I have the Gates barricade on one length of the fuel lines for a many years now , seems fine, still "soft", and no leaks. I wouldn't hesitate to use more. (pump gas , No E85 here) I use the standard screw style with Allen hex in all the easy access areas, they are reusable if you reshape the tabs. I always keep an eye on these as the weather cools. Constant tension clamps on the hard to reach fuel hoses under the plenum.
Follow Ups	Fuel clamps: any alternatives - Mike@ZSpeed 08:42:19 09/04/25 Re: Fuel clamps: any alternatives - itsa300zx 10:42:09 09/04/25 Re: Re: Fuel clamps: any alternatives - Mike@ZSpeed 10:54:21 09/04/25 replaced with hex/allen, most of my oem screw heads were - itsa300zx 11:06:25 09/04/25 Gates barricade FI - Drk93TT 21:29:18 09/04/25 i used oem hose, which fit the barbs a little tighter than - slayer fan 17:43:22 09/05/25
Post a Followup	You cannot reply to this message because you are not logged in.