300zx Track Prep posted by zwzweston on September 10, 2024 at 12:21 PM
Message
1.Nut and bolt all your suspension components/brakes with Nissan torque specs. 2.Get race pads (Hawk HP-S Min) and have a back-up with you JIC you burn through them. It sucks driving home on spent brakes. 3.Bring a Tire pressure gauge 4.Bring Extra oil and some distilled water.( again this is just in case) 5.Do not add new parts or a new tune prior to hitting the track unless you have time to drive the car and verify everything is working 100% 6. Do a boost pressure leak test 7. Oil cooler upgrade. 8. Flush brake fluid 9. Have a lower boost setting that you can use for extended sessions. If you need to qualify you can run high boost for a lap or 2, but it will heat everything up a ton.