Subject	A few more thoughts...
Posted by	CameronSF on September 11, 2024 at 11:37 AM
	This message has been viewed 107 times.
In Reply To	Other suggestions are good. Here is what I would recommend posted by Summeronthechain (MN) on September 11, 2024 at 11:00 AM
Message	The Z32 has undersized wheel bearings for heavy track use so check yours to make sure they are in good condition. If you have the motor apart it is a good time to eliminate all the under plenum cooling hoses and make sure your vacuum lines are secured and double check for boost leaks. I would also suggest doing the PVC reroute so you don't get the oil dump on high G right turns like my track day some time ago: VIDEO HERE You can find the write up here: PCV WRITE UP
Follow Ups	300zx Track Prep - zwzweston 12:21:29 09/10/24 A few things. - MixManMash 19:05:26 09/10/24 8. Tires (n/m) - itsa300zx 19:13:38 09/10/24 make sure your battery is tied down properly (n/m) - vorpalZed 19:45:53 09/10/24 Other suggestions are good. Here is what I would recommend - Summeronthechain (MN) 11:00:59 09/11/24 A few more thoughts... - CameronSF 11:37:54 09/11/24
Post a Followup	You cannot reply to this message because you are not logged in.