Subject	98 spec 5-speed is crap.
Posted by	Good2Zya2.0 on April 02, 2023 at 12:10 AM
	This message has been viewed 613 times.
Message	Ok, I started a full restoration on my 95 almost 5 years ago. Thought it would take a year maybe two, it took almost five. I bought a new 98 spec 5-speed, not because there was anything wrong with my original trans but just as a precaution. Well it was about three years before it was ever installed, but when it was I changed the fluid it was shipped with with Redline 90. All seemed fine, but then last week, after about 600 miles, it just started whining, really badly, in any gear when driving and when stopped with the clutch depressed. It stops when I let the clutch out in neutral and starts again when I push in the clutch. From what I have read its the input shaft bearing. Of course Nissan won't do a damn thing about. Has anyone actually had one of these fixed?
Follow Ups	98 spec 5-speed is crap. - Good2Zya2.0 00:10:13 04/02/23 Cracking the case open the input bearing is right up front. - SkiFly01 02:23:56 04/02/23 '98 trans whine - JMartz 12:30:19 04/02/23 Fortunately I still have my original transmission.... - Good2Zya2.0 14:28:46 04/02/23 I think you should try a fill of MT-85 before swapping back - Polishzx 14:53:55 04/02/23 Well the 85 won't fix my already F'd up bearing... - Good2Zya2.0 23:42:35 04/02/23 Post a video (n/m) - Drk93TT 10:41:28 04/03/23 I don't believe that it's the bearing (n/m) - Bernie (NoVA) 11:38:43 04/04/23 Mistake was changing the fluid and putting in - MixManMash 08:05:49 04/02/23 Re: Mistake was changing the fluid and putting in - Good2Zya2.0 13:49:29 04/02/23 That information is incorrect. Lots of evidence of people - MixManMash 20:15:57 04/02/23 Well they claim the only one they had a problem with... - Good2Zya2.0 23:31:15 04/02/23 I had 2 of those transmissions - Drk93TT 08:43:23 04/02/23 So what did you do with them? Also... - Good2Zya2.0 14:10:40 04/02/23 I bet the Redline MT-90 is the problem, it should be MT-85 - Polishzx 11:31:15 04/02/23 I switched to MT 85 last year, shifts seem smoother (n/m) - itsa300zx 13:31:56 04/02/23 That was my experience as well - Polishzx 16:31:32 04/04/23 Does the noise change when clutch pedal is pressed in? - ZXoltan 11:43:11 04/02/23 Re: Does the noise change when clutch pedal is pressed in? - Good2Zya2.0 14:02:12 04/02/23 Re: Re: Does the noise change when clutch pedal is pressed in? - ZXoltan 21:25:13 04/02/23 According to the article my pilot bearing is shot.... - Good2Zya2.0 08:06:15 04/03/23 Just to be clear, the noise does not change when you - black300zx 12:13:29 04/03/23 It only whines when the clutch is released/out.... - Good2Zya2.0 16:43:40 04/04/23 Got it, thanks for the clarification - black300zx 07:34:35 04/05/23 CORRECTION:It only whines with the clutch RELEASED/OUT (n/m) - Good2Zya2.0 17:00:34 04/04/23 Thats a pretty big correction to this thread. lol (n/m) - Drk93TT 17:09:12 04/05/23 Just a tiny detail :-P (n/m) - ZXoltan 12:47:26 04/06/23 I guess I should have read what you said more carefully - Drk93TT 05:44:49 04/03/23 Re: I guess I should have read what you said more carefully - Good2Zya2.0 08:37:09 04/03/23 Could be input shaft bearing like you said. - Drk93TT 10:44:24 04/03/23 LOL (n/m) - Adam (NoVA) 10:54:52 04/04/23 Listen to me now, believe me later.. - Bernie (NoVA) 11:42:03 04/04/23 Indeed (n/m) - Drk93TT 15:29:16 04/04/23 Oh come now - what about the special "anti-rust fluid" - Adam (NoVA) 10:32:11 04/05/23 Nice LOL - ConVerTT 20:13:43 04/08/23 *shrug* mine's great - vorpalZed 22:46:14 04/12/23
Post a Followup	You cannot reply to this message because you are not logged in.