TwinTurbo.NET: Nissan 300ZX forum - I think the front ES diff bushings are too small
People Seeking Info
 
   


     
Subject I think the front ES diff bushings are too small
     
Posted by Polishzx on September 21, 2022 at 6:45 PM
  This message has been viewed 115 times.
     
In Reply To I have ES installed and that explains ... posted by YamilZ32 on September 21, 2022 at 05:57 PM
     
Message This is from an old post, this isn't my photo but I found I was having the same problem as illustrated in the photo. The lower front diff bushing in the ES kit is super thin and there is barely any clearance between the diff and the lower bracket. I found a clear mark where my diff was hitting the lower bracket. You can use a different bushing or washer to add a little clearance, see if this fixes your problem. I ended up going with different front diff bushings, but plenty happy with the rear diff ES bushings, as well as ES subframe bushings.

     
Follow Ups  
     
Post a
Followup

You cannot reply to this message because you are not logged in.