Subject	My RPF1 setup
Posted by	ArubaDave on February 28, 2018 at 1:51 PM
	This message has been viewed 360 times.
In Reply To	RPF1 17x9.5" vs 18x9.5" fitment, hicas and brake clearance? posted by nissubaru on February 27, 2018 at 10:42 AM
Message	18x9.5 +45 20mm spacer with 265/35/18 in the front (so you could go with a 18x9.5 +38 in the front with a 10mm or 15mm spacer) 18x10 +38 with 285/35/18 rear Like my facebook page : facebook.com/GZAparts
Follow Ups	RPF1 17x9.5" vs 18x9.5" fitment, hicas and brake clearance? - nissubaru 10:42:10 02/27/18 The problem isn't the offset, it's the barrel design of the - vorpalZ 11:16:11 02/27/18 Second this. I have the Evo 8 Brakes and... - Nate (NoVA) 17:57:40 02/27/18 Bummer. Was really hoping to go square but I guess - nissubaru 20:49:52 02/27/18 17x9.5" will fit with stock brakes and 5mm spacer up front - ZXRider 11:24:57 02/27/18 Fits the back with no spacer needed. Look at my profile - ZXRider 11:26:17 02/27/18 Any reason you went with 255/40/17s instead of a bigger tire - nissubaru 13:05:03 02/27/18 The 255s were on the wheels - ZXRider 15:51:22 02/27/18 I have 275's on my 9" wheels (n/m) - vorpalZ 16:01:07 02/27/18 Did you have to roll the fenders? - ZXRider 20:55:39 02/27/18 didn't roll fenders, can't remember offset, will check (n/m) - vorpalZ 10:33:09 02/28/18 If you want the 17" fronts to clear a 13" BBK you need to - Bernie (NoVA) 12:10:53 02/27/18 Re: If you want the 17" fronts to clear a 13" BBK you need to - chohanta 14:06:19 02/27/18 Not that he needs it, but confirmed. We tested on mine. (n/m) - Nate (NoVA) 17:58:35 02/27/18 FYI changing wheel studs is a 5 minute job once the wheel is - LJZTT 15:47:32 02/27/18 My RPF1 setup - ArubaDave 13:51:28 02/28/18 ArubaDave - ZXRider 15:23:04 02/28/18 Hi Ben, I still have them in stock. (n/m) - ArubaDave 07:03:50 03/01/18
Post a Followup	You cannot reply to this message because you are not logged in.