Subject	Re: Thanks, I'm running 3" ducting hose
Posted by	induetime on February 28, 2018 at 1:45 PM
	This message has been viewed 331 times.
In Reply To	Thanks, I'm running 3" ducting hose posted by vorpalZ on February 27, 2018 at 04:30 PM
Message	IMHO the Wilwood SL6R front calipers & rotors from RMS that fit under stock 16" Z32 wheels is your limiting factor. If that is the kit you have, it has a small lever & low thermal mass. Beyond that from your profile it looks like your Z is "full weight", which makes your brakes work that much harder. A local gutted track Z32 has a Wilwood front kit & it is defiantly the weak link in the setup. My much heavier street Z with a 13" Stoptech BBK out breaks the track Z in a noticeable manor. Your ducting location is fine, the paneling is good, pads are great, tires are great. You can add more aero: front splitter & rear wing that will create some drag to aid in needing to brake less, brake later & carry more speed through the turns. All things suggested are beneficial, but I would personally save for a better front brake kit above all else. ~Induetime~ "Lag Less" First Stock Turbo to break 500WHP on boost alone (Pre-E85). New track car project "Diseaze": http://arizonazproject.wordpress DOT com Custom fabrication for the Z32: search QFAB on Facebook: HREF="https://www.facebook.com/QFABrication/?fref=ts">La-Z- Link More custom fabrication: search FuturFabrication on Facebook: HREF="https://www.facebook.com/FutureFabrication/?fref=ts">La-Z- Link
Follow Ups	calling the track rats... brake rotor cooling ducts - vorpalZ 10:00:41 02/27/18 Thoughts on brake cooling: - induetime 15:51:01 02/27/18 Thanks, I'm running 3" ducting hose - vorpalZ 16:30:40 02/27/18 Re: Thanks, I'm running 3" ducting hose - induetime 13:45:18 02/28/18 There's a lot to consider when trying to move air - BlackholeZ 20:36:46 02/27/18 How long are the sessions you are doing? - CameronSF 21:36:30 02/27/18 20 min sessions per run group - vorpalZ 00:02:26 02/28/18 Brake Ducting - MikeC(NZ) 00:37:27 02/28/18 You're using the brakes too much. ;) (n/m) - MixManMash 07:45:17 02/28/18 Dude. You’re in Canada. Does the sun even get there?!! - CameronSF 18:02:06 03/01/18 Come up here for summer solstice. Pretty much daylight from - MixManMash 00:43:35 03/02/18 So for these, what would people be wanting? - BlackholeZ 11:43:23 02/28/18 brake dust shields long gone... something that - vorpalZ 12:19:20 02/28/18 even reproducing the Zhome brackets would work - vorpalZ 12:57:57 02/28/18 Those are cool - BlackholeZ 14:50:54 02/28/18 Have you checked if your wheels are on backwards? (n/m) - Jiro 22:55:13 02/28/18 He doesn't run stock wheels, even for track. (n/m) - MixManMash 07:07:56 03/01/18 I did... way back in the day. (n/m) - vorpalZ 09:05:15 03/01/18 True. (n/m) - MixManMash 14:00:39 03/01/18 Slightly off topic- what pads and fluid are you running? - hunterg 20:26:43 03/01/18 Motul RBF 600 & Ferodo DS-3000 pads - vorpalZ 10:06:29 03/02/18 Someone needs to make a real backing plate - hunterg 20:31:47 03/01/18 $250 for that? (n/m) - Dallas DamonZ 22:20:31 03/01/18 Dude - it includes clamps after all. (n/m) - Bernie (NoVA) 19:23:06 03/04/18 On my Z I just took the brake duct hose and wedged it - spdrmn15 20:33:08 03/01/18
Post a Followup	You cannot reply to this message because you are not logged in.