Subject	Second this. I have the Evo 8 Brakes and...
Posted by	Nate (NoVA) on February 27, 2018 at 5:57 PM
	This message has been viewed 269 times.
In Reply To	The problem isn't the offset, it's the barrel design of the posted by vorpalZ on February 27, 2018 at 11:16 AM
Message	...had to go with 8.5" wheels up front to clear them. The barrel on the barrel was smoother and cleared the underside of the caliper. The 9" wheels the barrel would hit the underside even with a spacer. I prefer the look of the 17x9s but function > form. _______ AKA JohnnySombrero
Follow Ups	RPF1 17x9.5" vs 18x9.5" fitment, hicas and brake clearance? - nissubaru 10:42:10 02/27/18 The problem isn't the offset, it's the barrel design of the - vorpalZ 11:16:11 02/27/18 Second this. I have the Evo 8 Brakes and... - Nate (NoVA) 17:57:40 02/27/18 Bummer. Was really hoping to go square but I guess - nissubaru 20:49:52 02/27/18 17x9.5" will fit with stock brakes and 5mm spacer up front - ZXRider 11:24:57 02/27/18 Fits the back with no spacer needed. Look at my profile - ZXRider 11:26:17 02/27/18 Any reason you went with 255/40/17s instead of a bigger tire - nissubaru 13:05:03 02/27/18 The 255s were on the wheels - ZXRider 15:51:22 02/27/18 I have 275's on my 9" wheels (n/m) - vorpalZ 16:01:07 02/27/18 Did you have to roll the fenders? - ZXRider 20:55:39 02/27/18 didn't roll fenders, can't remember offset, will check (n/m) - vorpalZ 10:33:09 02/28/18 If you want the 17" fronts to clear a 13" BBK you need to - Bernie (NoVA) 12:10:53 02/27/18 Re: If you want the 17" fronts to clear a 13" BBK you need to - chohanta 14:06:19 02/27/18 Not that he needs it, but confirmed. We tested on mine. (n/m) - Nate (NoVA) 17:58:35 02/27/18 FYI changing wheel studs is a 5 minute job once the wheel is - LJZTT 15:47:32 02/27/18 My RPF1 setup - ArubaDave 13:51:28 02/28/18 ArubaDave - ZXRider 15:23:04 02/28/18 Hi Ben, I still have them in stock. (n/m) - ArubaDave 07:03:50 03/01/18
Post a Followup	You cannot reply to this message because you are not logged in.