TwinTurbo.NET: Nissan 300ZX forum - Re: If you want the 17" fronts to clear a 13" BBK you need to
Subject
Re: If you want the 17" fronts to clear a 13" BBK you need to
Posted by
chohanta
on February 27, 2018 at 2:06 PM
This message has been viewed
230
times.
In Reply To
If you want the 17" fronts to clear a 13" BBK you need to
posted by Bernie (NoVA)
on February 27, 2018 at 12:10 PM
Message
I have a set of 4 of those EVO wheels if anyone in interested. You can shoot an email to medtac0244@msn.com
Follow Ups
RPF1 17x9.5" vs 18x9.5" fitment, hicas and brake clearance?
-
nissubaru
10:42:10 02/27/18
The problem isn't the offset, it's the barrel design of the
-
vorpalZ
11:16:11 02/27/18
Second this. I have the Evo 8 Brakes and...
-
Nate (NoVA)
17:57:40 02/27/18
Bummer. Was really hoping to go square but I guess
-
nissubaru
20:49:52 02/27/18
17x9.5" will fit with stock brakes and 5mm spacer up front
-
ZXRider
11:24:57 02/27/18
Fits the back with no spacer needed. Look at my profile
-
ZXRider
11:26:17 02/27/18
Any reason you went with 255/40/17s instead of a bigger tire
-
nissubaru
13:05:03 02/27/18
The 255s were on the wheels
-
ZXRider
15:51:22 02/27/18
I have 275's on my 9" wheels (n/m)
-
vorpalZ
16:01:07 02/27/18
Did you have to roll the fenders?
-
ZXRider
20:55:39 02/27/18
didn't roll fenders, can't remember offset, will check (n/m)
-
vorpalZ
10:33:09 02/28/18
If you want the 17" fronts to clear a 13" BBK you need to
-
Bernie (NoVA)
12:10:53 02/27/18
Re: If you want the 17" fronts to clear a 13" BBK you need to -
chohanta
14:06:19 02/27/18
Not that he needs it, but confirmed. We tested on mine. (n/m)
-
Nate (NoVA)
17:58:35 02/27/18
FYI changing wheel studs is a 5 minute job once the wheel is
-
LJZTT
15:47:32 02/27/18
My RPF1 setup
-
ArubaDave
13:51:28 02/28/18
ArubaDave
-
ZXRider
15:23:04 02/28/18
Hi Ben, I still have them in stock. (n/m)
-
ArubaDave
07:03:50 03/01/18
Post a
Followup
You cannot reply to this message because you are not
logged in
.