TwinTurbo.NET: Nissan 300ZX forum - Fits the back with no spacer needed. Look at my profile
Subject
Fits the back with no spacer needed. Look at my profile
Posted by
ZXRider
on February 27, 2018 at 11:26 AM
This message has been viewed
268
times.
In Reply To
17x9.5" will fit with stock brakes and 5mm spacer up front
posted by ZXRider
on February 27, 2018 at 11:24 AM
Message
for the offset.
Follow Ups
RPF1 17x9.5" vs 18x9.5" fitment, hicas and brake clearance?
-
nissubaru
10:42:10 02/27/18
The problem isn't the offset, it's the barrel design of the
-
vorpalZ
11:16:11 02/27/18
Second this. I have the Evo 8 Brakes and...
-
Nate (NoVA)
17:57:40 02/27/18
Bummer. Was really hoping to go square but I guess
-
nissubaru
20:49:52 02/27/18
17x9.5" will fit with stock brakes and 5mm spacer up front
-
ZXRider
11:24:57 02/27/18
Fits the back with no spacer needed. Look at my profile -
ZXRider
11:26:17 02/27/18
Any reason you went with 255/40/17s instead of a bigger tire
-
nissubaru
13:05:03 02/27/18
The 255s were on the wheels
-
ZXRider
15:51:22 02/27/18
I have 275's on my 9" wheels (n/m)
-
vorpalZ
16:01:07 02/27/18
Did you have to roll the fenders?
-
ZXRider
20:55:39 02/27/18
didn't roll fenders, can't remember offset, will check (n/m)
-
vorpalZ
10:33:09 02/28/18
If you want the 17" fronts to clear a 13" BBK you need to
-
Bernie (NoVA)
12:10:53 02/27/18
Re: If you want the 17" fronts to clear a 13" BBK you need to
-
chohanta
14:06:19 02/27/18
Not that he needs it, but confirmed. We tested on mine. (n/m)
-
Nate (NoVA)
17:58:35 02/27/18
FYI changing wheel studs is a 5 minute job once the wheel is
-
LJZTT
15:47:32 02/27/18
My RPF1 setup
-
ArubaDave
13:51:28 02/28/18
ArubaDave
-
ZXRider
15:23:04 02/28/18
Hi Ben, I still have them in stock. (n/m)
-
ArubaDave
07:03:50 03/01/18
Post a
Followup
You cannot reply to this message because you are not
logged in
.