Subject	i have the Z1 bracket on my coverted slicktop.
Posted by	slayer fan on January 30, 2018 at 8:33 PM
	This message has been viewed 258 times.
In Reply To	** I should have added this to the original post. ** posted by 1blackz on January 30, 2018 at 02:14 PM
Message	i have a z1 howe radiator and the only mods i had to do was trim the lower shroud and upper hose, because the Howe is so thick.the upper shroud required no modification. the radiator sits slightly higher than stock, but the hood closes fine. i contacted MegaZ for an air guide/bracket to secure the top of the radiator.
Follow Ups	Radiator for the NA. - 1blackz 13:56:26 01/30/18 Koyo OEM replacement radiator will work just fine. (n/m) - ZXRider 14:01:19 01/30/18 2nd. No plastic end tanks to fail like OEM. (n/m) - vorpalZ 09:37:37 01/31/18 The Koyo OEM replacement has plastic end tanks. - MixManMash 15:13:04 01/31/18 Yea, but I don't know if Koyo even makes the - ZXRider 17:19:38 01/31/18 Not that I am aware of. (n/m) - MixManMash 20:22:34 01/31/18 ** I should have added this to the original post. ** - 1blackz 14:14:54 01/30/18 Do not advise - BlackholeZ 18:27:21 01/30/18 i have the Z1 bracket on my coverted slicktop. - slayer fan 20:33:48 01/30/18 radiators are overrated, do the delete (n/m) - LJZTT 15:06:03 01/30/18 I'm still waiting for on you to do the write up. Lol!! (n/m) - 1blackz 15:27:03 01/30/18 I ended up getting a 'like oem' unit from Bernie. - CameronSF 20:31:14 01/30/18
Post a Followup	You cannot reply to this message because you are not logged in.