TwinTurbo.NET: Nissan 300ZX forum - I used this info when I bypassed my fpcu:
People Seeking Info
 
   


     
Subject I used this info when I bypassed my fpcu:
     
Posted by stellar495 on January 12, 2018 at 4:34 PM
  This message has been viewed 528 times.
     
In Reply To Is there a write up for direct wiring? (n/m) posted by gt300zxtt(Jax) on January 11, 2018 at 10:24 PM
     
Message Some good info on how to bypass the stock fuel controls and why its NOT a good idea to just use jumper wires when bypassing the fpcu. Read both articles:

https://conceptzperformance.com/blog/defeating-the-stock-fuel-control-system/

https://conceptzperformance.com/blog/defeating-the-stock-fuel-control-system-addendum/

I also used a 70 amp relay and 10ga wire for the power and ground circuits in my setup. May be a bit over kill for some setups though.
Here's a link to the relay I used:

[ http://www.wiringproducts.com/70-amp-power-relay.html ]

     
Follow Ups  
     
Post a
Followup

You cannot reply to this message because you are not logged in.