TwinTurbo.NET: Nissan 300ZX forum - My tuner told me not to waste time degreeing the cams as
Subject
My tuner told me not to waste time degreeing the cams as
Posted by
MixManMash
on December 19, 2017 at 7:50 AM
This message has been viewed
406
times.
In Reply To
Yes and No
posted by MikeC(NZ)
on December 19, 2017 at 01:06 AM
Message
they adjust them on the dyno and then do a pull, one at a time. In this manner, they can optimize each cam independently.
Follow Ups
Anybody got a copy of guide-to-VG-cam-degreeing
-
nonstopna (SoCal)
22:20:09 12/18/17
You typically would only degree the cams w. adjustable gears
-
Bernie (NoVA)
00:44:56 12/19/17
This. (n/m)
-
MixManMash
01:01:08 12/19/17
Yes and No
-
MikeC(NZ)
01:06:35 12/19/17
Re: Yes and No
-
MikeC(NZ)
01:19:32 12/19/17
Re: Re: Yes and No
-
Rob260
06:40:19 12/19/17
My tuner told me not to waste time degreeing the cams as -
MixManMash
07:50:57 12/19/17
The problem I see with doing this is the baseline is unknown
-
LitlElvis
11:10:19 12/19/17
Could just be checking cam centerline to determine if...
-
-Grimm-
12:30:43 12/19/17
No pictures, but here's a PDF manual I made awhile ago
-
LitlElvis
09:54:58 12/19/17
^This is great info, thank you! (n/m)
-
Placuch
20:48:36 12/19/17
Re: This is great info, thank you!
-
MikeC(NZ)
03:15:36 12/20/17
Post a
Followup
You cannot reply to this message because you are not
logged in
.