Subject	ppg gear rarios
Posted by	dfenton2 on July 19, 2017 at 7:35 PM
	This message has been viewed 422 times.
In Reply To	quafie makes one but the gearing isnt ideal. and i didn't posted by volcomstone550 on July 19, 2017 at 07:25 PM
Message	2.706 1st 1.894 2nd 1.471 3rd 1.184 4th 1.000 5th 0.812 6th I'm sure you could get custom ratios for an added fee. The ppg sequential drops right into the stock z32 Trans case. But needs to run a larger 26 spline input shaft. 4 week lead time on the trans. Plus labor to get everything switched over and the dbw to aid in shifting most likely looking at close to 20 grand for the Trans all said and done. But would be so much fun.
Follow Ups	my T56 Magnum project is nearing completion - volcomstone550 09:33:26 07/18/17 I'd like to know costs when everything is all in place (n/m) - shiers69 12:31:08 07/18/17 Very interesting. - MixManMash 13:02:59 07/18/17 the custom built parts i will offer for 100% bolt on - volcomstone550 13:16:32 07/18/17 Re: the custom built parts i will offer for 100% bolt on - Dallas DamonZ 00:41:40 07/19/17 Looks nice! Interested in learning more. (n/m) - Mr.Stacy 14:23:28 07/18/17 cool project! What made you undertake this project? - ConVerTT 15:31:05 07/18/17 I am guessing those are the standard ratios - MixManMash 17:15:04 07/18/17 Very interesting. I am also curious to know your - Boosted1 19:32:20 07/18/17 driveshaft shop built a custom one for me and i have - volcomstone550 20:11:09 07/18/17 But since most high torque cars don't make high torque - not4resaleZ 10:04:25 07/19/17 i didnt buy a t56 magnum to ride around in first gear around - volcomstone550 10:33:11 07/19/17 You may be right, but I'd guess that C6 engine makes - not4resaleZ 10:54:11 07/19/17 Very interested in this project. At the rate we went - sfarrah 09:21:09 07/19/17 what really hooked me is the ppg helical sequential - volcomstone550 09:27:32 07/19/17 They do have a 6 speed sequential that will fit the Z32 - MixManMash 11:58:03 07/19/17 Helical. (n/m) - dfenton2 12:42:01 07/19/17 quafie makes one but the gearing isnt ideal. and i didn't - volcomstone550 19:25:41 07/19/17 ppg gear rarios - dfenton2 19:35:22 07/19/17 i think mixman and dfenton and myself have conflicting - volcomstone550 10:40:49 07/20/17 I am currently in talks with ppg about their sequential - dfenton2 12:12:58 07/20/17 +20k is a waste on a 300z specific part in my opinion - volcomstone550 12:33:16 07/20/17 it's not 300 specific. can swap the internals to any rb25 26 - dfenton2 15:29:55 07/20/17 Not to mention that added electronics for the setup. (n/m) - induetime 18:40:30 07/20/17 i already have a motec M130 on the car :) (n/m) - volcomstone550 19:12:59 07/20/17 Pretty impressive! (n/m) - OverZealous (CT) 20:39:00 07/19/17 Is this for a LS swap? I may consider this after mine's done - XTZ 20:57:54 07/20/17 I thought a T-56 starter was opposite (mirror) position to>> - Spectrum (WI) 00:26:22 07/22/17 appears to have a z32 Auto bell house which leaves the - Dane (Houston) 23:49:26 07/22/17 You have my interest. Im on my 3rd trans - Zsgetyoulaid 06:48:11 07/22/17
Post a Followup	You cannot reply to this message because you are not logged in.