Subject	Inzane's Project Z: Random nuts & bolts question.
Posted by	Inzane on July 04, 2016 at 1:11 PM
	This message has been viewed 913 times.
Message	Hello Folks, I am trying to make a go at finally getting my car done this summer and may need to turn to you guys occasionally for some help. While I managed to bag & tag a majority of the hardware during my disassembly, some stuff fell through the cracks. My first example. These turbo compressor outlet flanges. I believe I've found the three bolts for the DRIVER side. As shown in the picture, there are two 2.5" long 10mm bolts and one 1" long 10mm bolt, all grade 7. However I'm having trouble finding and identifying the corresponding bolts for the PASSENGER side. I did find three 0.75" long bolts, 10mm and grade 7. However they seem to be a tad too short (not much thread sticks through the flange) and lack the double-washer that the three in the above picture have. I think I need to keep looking. Question to you folk: What is the correct size for the three bolts on the passenger side? (1"?) Thanks. Inzane
Follow Ups	Inzane's Project Z: Random nuts & bolts question. - Inzane 13:11:36 07/04/16 Meh. Just see how deep the threads are in the turbo and go - MixManMash 14:12:53 07/04/16 I agree, that's a good last resort. I'd still prefer to - Inzane 14:18:23 07/04/16 The short one in the picture is the correct one, just - CmyZ 14:19:14 07/04/16 meaning I should have somewhere three additional 1" bolts - Inzane 14:24:50 07/04/16 25mm. Get your metric on, yo. (n/m) - MixManMash 15:33:44 07/04/16 yes 3 bolts at 25.4 MM = 1.0 ". - CmyZ 18:59:37 07/06/16 found em! - Inzane 17:36:23 07/08/16 Let the games begin! - ConVerTT 15:23:59 07/05/16
Post a Followup	You cannot reply to this message because you are not logged in.