Subject	I'm curious, where does that rule come from?
Posted by	ttsmokin on November 09, 2015 at 6:19 PM
	This message has been viewed 276 times.
In Reply To	Eh, not really "about the same" at 20deg higher temp :-) posted by Ashman2k2 on November 09, 2015 at 10:49 AM
Message	I know that you need to stay below the point of cooking an oil, but 250* is 250* whether its 0w30 or 20w50. Is it to account for oil pressure decreasing as a result of elevated temperature? I remember reading on BITOG intro, that he decreased the oil viscosity and it lowered the oil temperature on the track because the oil flow increased (pressure decrease, aka resistance to flow). So perhaps the solution is to lower the oil viscosity, which will actually increase oil flow to the bearings and in turn lower the oil temperature preventing the oil pressure from decreasing as a result of high temperatures. Seems like an optimization problem to me.
Follow Ups	Engine break in - oil cooler bypass - tiale11 12:27:11 11/03/15 If it's opening up it's because it's designed to do so. - BlackholeZ 15:59:16 11/03/15 Undesirable in the sense that.... - tiale11 17:16:02 11/03/15 Ah, I was thinking that the excess returned to the pan - BlackholeZ 21:51:09 11/03/15 In short, both... - tiale11 09:52:53 11/04/15 Bearing Pictures... - tiale11 09:18:35 11/06/15 Ouch - -Grimm- 15:50:32 11/06/15 Don't be fooled; they're not "ouch". Just shows some - Ashman2k2 11:52:11 11/07/15 ^ that (n/m) - tiale11 17:29:03 11/08/15 I would still consider unfiltered oil and embedded particles - -Grimm- 13:32:22 11/09/15 Do you monitor oil pressures with an aftermarket gauge? - ttsmokin 19:26:15 11/07/15 I was looking through your profile, and I don't see what - Ashman2k2 13:28:19 11/08/15 ^ That. More... - tiale11 17:48:02 11/08/15 Where is the 60psi valve? - ttsmokin 19:14:02 11/08/15 The 60psi is inside the tree at the cooler output location - tiale11 20:01:58 11/08/15 Please post back with results when you reinstall the valve - ttsmokin 21:18:47 11/08/15 I run stock turbos - ttsmokin 19:07:30 11/08/15 About the same oil temps for me as well - tiale11 20:09:35 11/08/15 Eh, not really "about the same" at 20deg higher temp :-) - Ashman2k2 10:49:02 11/09/15 I'm curious, where does that rule come from? - ttsmokin 18:19:48 11/09/15 Those tid bits of data can be misleading - Ashman2k2 11:25:15 11/10/15 Cool, numbers look good. Good thing you went to the higher - Ashman2k2 10:45:58 11/09/15 I am considering running Motul 300V in the future - ttsmokin 18:27:11 11/09/15 Got it. Balanced engine is good :-) (n/m) - Ashman2k2 11:27:40 11/10/15
Post a Followup	You cannot reply to this message because you are not logged in.