Subject	I run stock turbos
Posted by	ttsmokin on November 08, 2015 at 7:07 PM
	This message has been viewed 307 times.
In Reply To	I was looking through your profile, and I don't see what posted by Ashman2k2 on November 08, 2015 at 01:28 PM
Message	Normal operating oil temp is around 170F and I've seen it climb to 210F on a mountain pass with steady boost. On the track I've seen it peak at 230F. I haven't seen the track yet with my current setup, I was previously running 5w40 Rotella T6. I can't remember 100% what my bearing clearances were, I think I have them written down somewhere. Fairly sure they were on the high end of the OEM range. I'd guess 0.002". I'm running OEM graded bearings, but not the grades specified by the markings. I changed them to get the clearances I was aiming for. Strange that not many people seem to be running King bearings on here. I couldn't even find many retailers online when I googled VG30DETT King Bearings.
Follow Ups	Engine break in - oil cooler bypass - tiale11 12:27:11 11/03/15 If it's opening up it's because it's designed to do so. - BlackholeZ 15:59:16 11/03/15 Undesirable in the sense that.... - tiale11 17:16:02 11/03/15 Ah, I was thinking that the excess returned to the pan - BlackholeZ 21:51:09 11/03/15 In short, both... - tiale11 09:52:53 11/04/15 Bearing Pictures... - tiale11 09:18:35 11/06/15 Ouch - -Grimm- 15:50:32 11/06/15 Don't be fooled; they're not "ouch". Just shows some - Ashman2k2 11:52:11 11/07/15 ^ that (n/m) - tiale11 17:29:03 11/08/15 I would still consider unfiltered oil and embedded particles - -Grimm- 13:32:22 11/09/15 Do you monitor oil pressures with an aftermarket gauge? - ttsmokin 19:26:15 11/07/15 I was looking through your profile, and I don't see what - Ashman2k2 13:28:19 11/08/15 ^ That. More... - tiale11 17:48:02 11/08/15 Where is the 60psi valve? - ttsmokin 19:14:02 11/08/15 The 60psi is inside the tree at the cooler output location - tiale11 20:01:58 11/08/15 Please post back with results when you reinstall the valve - ttsmokin 21:18:47 11/08/15 I run stock turbos - ttsmokin 19:07:30 11/08/15 About the same oil temps for me as well - tiale11 20:09:35 11/08/15 Eh, not really "about the same" at 20deg higher temp :-) - Ashman2k2 10:49:02 11/09/15 I'm curious, where does that rule come from? - ttsmokin 18:19:48 11/09/15 Those tid bits of data can be misleading - Ashman2k2 11:25:15 11/10/15 Cool, numbers look good. Good thing you went to the higher - Ashman2k2 10:45:58 11/09/15 I am considering running Motul 300V in the future - ttsmokin 18:27:11 11/09/15 Got it. Balanced engine is good :-) (n/m) - Ashman2k2 11:27:40 11/10/15
Post a Followup	You cannot reply to this message because you are not logged in.