Subject	I was looking through your profile, and I don't see what
Posted by	Ashman2k2 on November 08, 2015 at 1:28 PM
	This message has been viewed 254 times.
In Reply To	Do you monitor oil pressures with an aftermarket gauge? posted by ttsmokin on November 07, 2015 at 07:26 PM
Message	turbo's you are running? Do you know what your operating or peak oil temperatures are? Do you know what your bearing clearances were set to? I would be interested to see the condition of your bearings depending on the type of use and power you make after some miles. Generally a high output engine needs a high temp high shear oil with more oil film thickness and strength which seems to be correlated with higher viscosity oils. However cold start temperatures, filtering specs, and system bypasses etc. need to be considered as well when modifying the system..hence this thread. Oh, and King bearings are probably the highest quality bearings out there, ahead of the brands you mentioned.
Follow Ups	Engine break in - oil cooler bypass - tiale11 12:27:11 11/03/15 If it's opening up it's because it's designed to do so. - BlackholeZ 15:59:16 11/03/15 Undesirable in the sense that.... - tiale11 17:16:02 11/03/15 Ah, I was thinking that the excess returned to the pan - BlackholeZ 21:51:09 11/03/15 In short, both... - tiale11 09:52:53 11/04/15 Bearing Pictures... - tiale11 09:18:35 11/06/15 Ouch - -Grimm- 15:50:32 11/06/15 Don't be fooled; they're not "ouch". Just shows some - Ashman2k2 11:52:11 11/07/15 ^ that (n/m) - tiale11 17:29:03 11/08/15 I would still consider unfiltered oil and embedded particles - -Grimm- 13:32:22 11/09/15 Do you monitor oil pressures with an aftermarket gauge? - ttsmokin 19:26:15 11/07/15 I was looking through your profile, and I don't see what - Ashman2k2 13:28:19 11/08/15 ^ That. More... - tiale11 17:48:02 11/08/15 Where is the 60psi valve? - ttsmokin 19:14:02 11/08/15 The 60psi is inside the tree at the cooler output location - tiale11 20:01:58 11/08/15 Please post back with results when you reinstall the valve - ttsmokin 21:18:47 11/08/15 I run stock turbos - ttsmokin 19:07:30 11/08/15 About the same oil temps for me as well - tiale11 20:09:35 11/08/15 Eh, not really "about the same" at 20deg higher temp :-) - Ashman2k2 10:49:02 11/09/15 I'm curious, where does that rule come from? - ttsmokin 18:19:48 11/09/15 Those tid bits of data can be misleading - Ashman2k2 11:25:15 11/10/15 Cool, numbers look good. Good thing you went to the higher - Ashman2k2 10:45:58 11/09/15 I am considering running Motul 300V in the future - ttsmokin 18:27:11 11/09/15 Got it. Balanced engine is good :-) (n/m) - Ashman2k2 11:27:40 11/10/15
Post a Followup	You cannot reply to this message because you are not logged in.