Subject	Lap valves
Posted by	EngineerLV on July 30, 2015 at 9:05 PM
	This message has been viewed 301 times.
In Reply To	I am rebuilding a set of heads for the first time and would posted by z32z on July 29, 2015 at 07:10 PM
Message	A quick lap of the valves will be the easiest way to find out your issues. If they are bent, you will have wear on one area of the valve face.
Follow Ups	I am rebuilding a set of heads for the first time and would - z32z 19:10:58 07/29/15 Depends how bent the valves are. Easier to see the bends - zxtuner161 07:52:57 07/30/15 You may be able to notice the material strain - -Grimm- 09:27:11 07/30/15 Thank you for the input. I placed each valve in a drill and - z32z 14:15:48 07/30/15 Most likely thinking of "soft valve" issue w/ 90 (n/m) - FrozTTy 10:25:46 07/30/15 Re: Most likely thinking of "soft valve" issue w/ 90 - wild_maxx 14:34:29 07/30/15 This is great info. Thanks. - z32z 15:45:10 07/30/15 Why not have the machine shop measure the valves? - zellamay 14:28:43 07/30/15 Lap valves - EngineerLV 21:05:31 07/30/15 Not necessarily true - ZXoltan 06:13:25 07/31/15
Post a Followup	You cannot reply to this message because you are not logged in.