TwinTurbo.NET: Nissan 300ZX forum - Bosch also has new 1700cc injectors
People Seeking Info
 
   


     
Subject Bosch also has new 1700cc injectors
     
Posted by Greg D. (Specialty-Z) on June 30, 2015 at 6:34 PM
  This message has been viewed 732 times.
     
In Reply To Injector Dynamics releases ID1700 cc/min injector posted by LitlElvis on June 30, 2015 at 04:13 PM
     
Message We bought our first set from Bosch back in March for the GTR.
They are Bosch manufactured and unmodified 160 lb/hour or 1700cc at 43.5 PSI.
They represent Bosch next generation technology of high flow injectors with crazy fast response time and excellent flow pattern.
The response/ lag time or dead times are almost what a stock injector is that is crazy lower than any other large injector we have seen.
We replaced 1300cc injectors for these new ones, they tune easier, they provide better throttle response, gas mileage on E85 has dramatically improved with the same air fuel ratio settings.

Here are the specs:

Specifications:
Coil Resistance: 9.1 Ohms / High Impedance
Dead Time: 0.45ms at 14 volts
Static Flow Rate @ 43.5 PSI ( 300kPa ) w/Gas: 1700 cc/min = 160 lb/hr
Static Flow Rate @ 50 PSI ( 350kPa ) w/Gas: 1875 cc/min = 180 lb/hr
Static Flow Rate @ 58 PSI ( 400kPa ) w/Gas: 2000 cc/min = 195 lb/hr
Connector: Bosch EV1
Injector Length: O-Ring to O-Ring: 62 mm
Injector Overall Length: 74 mm
Injector Body Diameter: 16mm
O-Ring: 14.5mm Viton
Acceptable Fuels: Gas/Petrol, alcohol/methanol, E85, CNG

The only down side is they are tall and will not fit in all applications.
We can offer them for $150 per injector = $900 a set.

     
Follow Ups  
     
Post a
Followup

You cannot reply to this message because you are not logged in.