Subject	I changed both my wastegate actuators with the engine in
Posted by	Zvil (FL) on March 21, 2015 at 6:42 PM
	This message has been viewed 233 times.
In Reply To	Change wastegate posted by irdhp on March 21, 2015 at 02:22 PM
Message	I just suspended the engine with ratchet straps and a leg from an engine hoist on wood across the strut towers. Then I unbolted the k-member and let it hang. Not very safe but I know what I'm doing, I honestly don't recommend it, use this method at your own risk. Also I don't know how well this would work on stock turbos (for anyone searching in the future, yes I broke the 4th wall :P) I also successfully changed the knock sensor in the stock location without removing the plenum and/or transmission, I only removed the lower heater hose and the starter. Some say they have changed the engine harness without removing the engine, others say they have removed turbos without pulling the engine.... but in the end everyone (including myself) realize it would've taken about the same amount of time to pull the engine (or in the case of the knock sensor, the transmission) and it would've been alot less hassle. ____________________________________________________ "The dreaded 2nd windshiled wiper swipe when you turn it off its almost like tis showing you that it's boss, and it doesn't have to stop when you tell it to :("-College Boy (discussion on ptu relocation) "No good reason to put it there anyway. -Bernie (NoVA) False -vorpalZ False. -Bernie (NoVA) You're correct, there are 3 good reasons -vorpalZ False. -Bernie (NoVA) Wow, right again, just remembered another, make that 4 -vorpalZ" XD
Follow Ups	Change wastegate - irdhp 14:22:30 03/21/15 I've never done it before, but I imagine it's possible (n/m) - -Grimm- 17:58:07 03/21/15 I changed both my wastegate actuators with the engine in - Zvil (FL) 18:42:30 03/21/15 Changing wastegates - MikeC(NZ) 19:11:16 03/21/15 I didn't even consider that.... that would be impossible IMO (n/m) - Zvil (FL) 20:35:51 03/21/15 Engine out. (n/m) - Zuberman 00:21:14 03/22/15
Post a Followup	You cannot reply to this message because you are not logged in.