Subject	Kaminari Skirts Fitment Issue forgot to mention
Posted by	zxnazx(tt) on March 20, 2015 at 10:43 AM
	This message has been viewed 299 times.
In Reply To	What you describe posted by -Grimm- on March 20, 2015 at 09:35 AM
Message	In regards to the kaminari skirts. One skirt was pre cut nicely for the z, but the other side looked like someone forgot to finish it period.There were an inch or so extra material preventing the fitment, so took about an hour or so to pre cut, grind off extra material for fitment. After all was done they fit ok but the front sections where they attach to the fender stick out too much requiring some adhesive like seam sealer to glue the skirt to the fender.
Follow Ups	Twin Z Design! Prepping For Paint Thoughts Of material Pics - zxnazx(tt) 22:32:17 03/19/15 Cool! I'm SO not artistic. I can uglify most anything, lol. - Zuberman 23:09:52 03/19/15 Less than 5 cents.. - ttz'in (norcal) 23:27:37 03/19/15 I'm in El Dorado Hills - -Grimm- 00:52:52 03/20/15 Apologies Dennis, meant more than five.....duh - ttz'in (norcal) 08:45:03 03/20/15 Nice work. Thanks for that info. First time I've seen - Boosted1 05:57:34 03/20/15 Nice work. Have you ever shaved rock guard off a oem bumper? - Jkova300z 08:06:59 03/20/15 What you describe - -Grimm- 09:35:06 03/20/15 Kaminari Skirts Fitment Issue forgot to mention - zxnazx(tt) 10:43:15 03/20/15 That's what I expected - BlackholeZ 14:07:11 03/20/15 80 is too rough. I would start with 320 or 220 then 400 - zxnazx(tt) 17:16:12 03/20/15 That's what I was thinking - BlackholeZ 20:36:14 03/20/15 thought of dipping it? dipyourcar.com (n/m) - LivinTheDream 21:31:01 03/20/15 I looked into it, heavily. - BlackholeZ 01:20:37 03/21/15 Figured Id have some work cut out with the sanding. - Jkova300z 19:10:02 03/20/15 Havent shaved it but seen it done. - zxnazx(tt) 13:16:22 03/20/15 Great info. Bookmarked for future reference. Thanks! (n/m) - J-Mart 11:37:54 03/20/15
Post a Followup	You cannot reply to this message because you are not logged in.