Subject	For those who have used VHT Wrinkle paint successfully
Posted by	Stanky on February 12, 2015 at 1:26 AM
	This message has been viewed 587 times.
Message	Do you have any pictures of how it turned out? I've never used these cans before so I'm curious as to what you guys did to get the powder coat like look. I've seen some people do as little as brake clean before spraying, and others have gone through the whole paint stripping method, both with good results. It seems like using a heat gun gives the best results. Do you guys use the heat gun after every coat, or just at the end of the 3rd heavy coat? I'd still like to keep the same colour scheme, but wrinkle everything...just getting bored of the look I guess
Follow Ups	For those who have used VHT Wrinkle paint successfully - Stanky 01:26:33 02/12/15 Re: For those who have used VHT Wrinkle paint successfully - ouikikazz 03:51:26 02/12/15 I just applied the coats as directed and let it dry - JaffaUK 06:55:52 02/12/15 did you sand it down or use paint stripper? - Stanky 10:28:12 02/12/15 it was polished before - I sanded it down to key the surface (n/m) - JaffaUK 11:52:36 02/12/15 See the post linked below (scroll to the middle roughly) - J-Mart 15:18:11 02/12/15 I just followed the directions on the can, no heat gun. - ZaXxon 04:28:29 02/13/15 Interesting color scheme you have there (n/m) - FrozTTy 09:40:17 02/13/15 Sand with 220/ put it in the sun. wont work if its cold/wet (n/m) - DualZ (SF) 11:56:35 02/14/15
Post a Followup	You cannot reply to this message because you are not logged in.