TwinTurbo.NET: Nissan 300ZX forum - How thick are other brackets?
People Seeking Info
 
   


     
Subject How thick are other brackets?
     
Posted by BoneZ (MD) on September 21, 2014 at 12:16 AM
  This message has been viewed 1068 times.
     
In Reply To Re: Re: Re: CTS-V Brembo calipers on the Z32? posted by Bad Fish on September 20, 2014 at 11:07 PM
     
Message And what size spacers do they require?

The spacer is determined by the offset of the caliper -sucks which is why for the longest time I was sticking with BNR32 and then Z33 calipers that do not require brackets.

But the 6-pot is just fan-fucking-tastic :)

As is the 14" rotor.

If these two things aren't what is pulling an individual to these then I would advise staying with a 13" rotor and 4 pot calipers.

The brackets for the SRT8 6 pot are very similar - your argument of those characteristics aren't really the heart of the matter - clearing the lower control arm is.

These brackets were initially built for a Z31 and tested on both the Z31 and S13 - the LCA was not a problem in either case.

-___________________________________________________________-

 photo 590.jpg

     
Follow Ups  
     
Post a
Followup

You cannot reply to this message because you are not logged in.