Subject	Koyo radiator and hood prop
Posted by	RedSER13 on September 03, 2014 at 12:52 PM
	This message has been viewed 301 times.
Message	Hood prop hits the radiator cap when I set it down on the clip and it keeps popping out of the clip after a drive. The only way I can keep it still is when I tie it down. I even installed new radiator bottom rubber mounts with the Koyo and also using (cheap) Z1 radiator brackets. Aside from hood shocks, any tips how to keep the prop still?
Follow Ups	Koyo radiator and hood prop - RedSER13 12:52:50 09/03/14 Mine rests just behind the neck and lays sorta on top of the - PiotrC70 14:01:59 09/03/14 Re: Koyo radiator and hood prop - 95TTurboZX 15:02:16 09/03/14 Hood shocks - nb623107 15:28:44 09/03/14 I just bend a slight "bump" on the bar to clear the rad cap (n/m) - itsa300zx 15:36:17 09/03/14 SZ Koyo brackets looked like the best solution - not4resaleZ 16:06:43 09/03/14 Had same problem. Hood struts. Awesome. Do it. (n/m) - J-Mart 16:26:28 09/03/14 awesome. thanks guys! (n/m) - RedSER13 11:03:26 09/04/14 Re: Koyo radiator and hood prop - AndrewG 08:37:37 09/07/14
Post a Followup	You cannot reply to this message because you are not logged in.