Subject	You may want to discuss with Seb about
Posted by	HighPsi (NorCal) on August 29, 2014 at 9:44 AM
	This message has been viewed 375 times.
In Reply To	yup. ordering another set of Cometic 1.2's posted by wickdGSXR on August 28, 2014 at 10:45 PM
Message	Tomei/Z1 adjustable exhaust cam gears as well as the bde intake cam gears. My set up still needs the exhaust side gears which is why my tq is a little lower in the 3500rpm range where most people with the same mods (minus the jwt 500 cams) are hitting ~300rwtq @ 3500. This is on 91 octane.
Follow Ups	JWT cams, timing & shaved heads - wickdGSXR 11:39:42 08/28/14 Depends on the following - ztunerz 11:57:54 08/28/14 If you're putting in new cams - -Grimm- 12:21:36 08/28/14 factory cams on a untouched block are about 4to -6* off - Ben@HoustonZAuto 11:26:57 08/29/14 This. Dialing in the cam gears makes a huge difference, - MixManMash 13:10:00 08/28/14 specs - wickdGSXR 15:40:51 08/28/14 Here are my before and after cam timing specs; - marklar182 16:51:44 08/28/14 Re: specs - BLACKBEAST 18:23:56 08/28/14 yup. ordering another set of Cometic 1.2's - wickdGSXR 22:45:43 08/28/14 You may want to discuss with Seb about - HighPsi (NorCal) 09:44:52 08/29/14 BDE also has adjustable exhaust gears. (n/m) - MixManMash 10:27:13 08/29/14 thank you, didn't know that. (n/m) - HighPsi (NorCal) 15:05:42 08/29/14
Post a Followup	You cannot reply to this message because you are not logged in.