Subject	Depends on the following
Posted by	ztunerz on August 28, 2014 at 11:57 AM
	This message has been viewed 381 times.
In Reply To	JWT cams, timing & shaved heads posted by wickdGSXR on August 28, 2014 at 11:39 AM
Message	How much the heads are shaved, if the block is decked and how much, if the block is align honed and how much it changes the centerline of the crank. Also keep in mind the 500 cams are not exact, you need the gears to adjust the cams even if everything else is stock. Bottom line , if you have 500+ cams you need the gears so you can get everything lined up. Harry Formerly yellowzxtt
Follow Ups	JWT cams, timing & shaved heads - wickdGSXR 11:39:42 08/28/14 Depends on the following - ztunerz 11:57:54 08/28/14 If you're putting in new cams - -Grimm- 12:21:36 08/28/14 factory cams on a untouched block are about 4to -6* off - Ben@HoustonZAuto 11:26:57 08/29/14 This. Dialing in the cam gears makes a huge difference, - MixManMash 13:10:00 08/28/14 specs - wickdGSXR 15:40:51 08/28/14 Here are my before and after cam timing specs; - marklar182 16:51:44 08/28/14 Re: specs - BLACKBEAST 18:23:56 08/28/14 yup. ordering another set of Cometic 1.2's - wickdGSXR 22:45:43 08/28/14 You may want to discuss with Seb about - HighPsi (NorCal) 09:44:52 08/29/14 BDE also has adjustable exhaust gears. (n/m) - MixManMash 10:27:13 08/29/14 thank you, didn't know that. (n/m) - HighPsi (NorCal) 15:05:42 08/29/14
Post a Followup	You cannot reply to this message because you are not logged in.