Subject	The 2nd method is incorrect
Posted by	sparkie on July 03, 2014 at 12:16 AM
	This message has been viewed 138 times.
In Reply To	for those with aftermarket boost solenoid posted by ouikikazz on July 01, 2014 at 09:40 AM
Message	The solenoid runs on duty cycle to 'bleed' off the compressed air. So the Haltech recommended method is the correct way. www.ztechz.net ICQ # 14337317
Follow Ups	for those with aftermarket boost solenoid - ouikikazz 09:40:16 07/01/14 I don't know exactly how the haltech works - -Grimm- 10:20:36 07/01/14 SZ told me to leave 1 open and use 2 to wastegate actuator - MixManMash 11:25:48 07/01/14 Re: SZ told me to leave 1 open and use 2 to wastegate actuator - ouikikazz 11:34:37 07/01/14 The port on the front reads only boost from my experience - TTZ2NV(EPTmotorsports) 11:39:19 07/01/14 Re: The port on the front reads only boost from my experience - ouikikazz 11:56:40 07/01/14 I didn't use elbows and made it work. - MixManMash 12:45:02 07/02/14 Yes. That is the port I used. (n/m) - MixManMash 11:50:16 07/01/14 The 2nd method is incorrect - sparkie 00:16:47 07/03/14
Post a Followup	You cannot reply to this message because you are not logged in.