Message |
in my 2+2 tanks. It's tight but for 2 seaters, there's more room. I'm using Haltech to control the pumps running with relay. You need thicker power and ground wires. You will also need to run -8AN feed line. Drill out the stock feed port in the pump assembly cover and put a bulkhead there. I'm using the stock return line with no issues. I'm using an AEM pressure regulator. I found out the standard orifice in them is not big enough to allow flow back in the tank. I had to switch out to a bigger orifice.
www.ztechz.net ICQ # 14337317
|
|