Subject	Depends on the max continuous current of the fuel pump.
Posted by	DVDBURN (MD) on June 02, 2013 at 11:22 PM
	This message has been viewed 308 times.
In Reply To	What size fuses would you recommend? (n/m) posted by toykoz32 on June 02, 2013 at 01:21 PM
Message	Since things like this can be unpredictable as to what exactly the max working amperage is even though it may be stated in the documentation, I would start with a value of 10% more than the documented max amperage and use a slow blow fuse. If that blows quickly then increase the rating by 10% until you find a working point. Most likely you'll only need a fuse that's 20% higher than the max amperage. www.mytwinturbo.com Nissan Data Voice - The first Nissan diagnostic software with a voice! Nissan Data Voice on YouTube Download my Nissan 300ZX Vin/Model Lookup. Watch an ECZA meet caravan!
Follow Ups	Introducing a heavy duty hi-amp FPC made from OEM. - DVDBURN (MD) 20:06:38 06/01/13 What do you suggest to avoid the issue others are having - Evan_Wright (Ca) 20:36:44 06/01/13 Last time I talked to Gary.. We were talking about the - KongZTT GT28RS MD 20:40:40 06/01/13 The pumps only run at full speed for short bursts when - Ash's Z 21:04:58 06/01/13 not true -- folks will have issues whenever you have - The Devils Z 21:47:14 06/01/13 I've been running it in my personal Z for 50K miles now - Ash's Z 23:44:09 06/01/13 There is no reason why anyone should take the power wire of - The Devils Z 12:58:31 06/02/13 ? The pumps always receive (+) power when the fuel - Ash's Z 13:26:52 06/02/13 your response doesn't explain to me why to use the OEM - The Devils Z 15:23:36 06/02/13 I'm not saying that beefing up the wiring would have any - Ash's Z 00:02:57 06/03/13 I can't speak to your feelings and I am not speaking - The Devils Z 00:50:14 06/03/13 I understand. I just think that the few cases that there - Ash's Z 12:57:33 06/03/13 the power circuit isn't really the issue - aliaZ 00:47:09 06/03/13 If you have the right size power wire, it doesn't matter - The Devils Z 01:03:48 06/03/13 The ground is just as important as the (+) feed line. - Ash's Z 10:01:13 06/03/13 the current must have a return path - aliaZ 10:28:39 06/03/13 Ironically enough, the electrons actually come from the (-) - Ash's Z 12:53:54 06/03/13 Whaaa? - KongZTT GT28RS MD 05:13:33 06/04/13 also, the specialty Z setup isn't necessarily better. - aliaZ 00:51:22 06/03/13 The stock wiring & connectors are only capable of supplying - sparkie 12:01:15 06/02/13 I saw the same thing . . and needed the same thing (n/m) - toykoz32 13:16:40 06/02/13 Hmm. I have run up to 30.5psi of boost, so say 75psi - Ash's Z 13:29:19 06/02/13 mine was 17psi when fuel pressure started to drop (n/m) - toykoz32 15:18:48 06/02/13 Something else was wrong then. - Ash's Z 15:10:44 06/03/13 Your wrong Ash, we about burned up the stock wiring harness - DarkZide 22:27:30 06/02/13 I suspect there was a different issue that caused this. - DVDBURN (MD) 00:30:31 06/02/13 Wow Gary! - KongZTT GT28RS MD 20:37:54 06/01/13 Thats awesome, Gary. Will it be available without the switch - ZXoltan 20:38:56 06/01/13 I'll probably end up making most of them that way. - DVDBURN (MD) 01:28:26 06/02/13 Looks great, Gary. :) - Ash's Z 21:10:43 06/01/13 Thanks Ash. - DVDBURN (MD) 01:13:56 06/02/13 That power supply I gave you goes up to 500amps :) (n/m) - KongZTT GT28RS MD 03:34:22 06/02/13 No no. The load bank is something else. (n/m) - DVDBURN (MD) 07:25:08 06/02/13 My mistake :) (n/m) - KongZTT GT28RS MD 08:05:45 06/02/13 The circuit traces will fail before you even get close to - Ash's Z 13:25:18 06/02/13 Re: The circuit traces will fail before you even get close to - DVDBURN (MD) 22:50:03 06/02/13 will still need to address the factory wiring harness issue - The Devils Z 21:40:15 06/01/13 I will agree with you, but only in certain applications.. >> - Ash's Z 00:06:39 06/02/13 What do the stock tt pumps pull? - michaell32 (FL) 04:36:30 06/02/13 The Deatschwerks DW300 pumps are pretty efficient too - maglito 16:28:53 06/02/13 I have one of those laying around. - michaell32 (FL) 20:45:47 06/02/13 I like them, I have two in my fuel tank right now. (n/m) - maglito 10:16:08 06/03/13 very cool (n/m) - Madhatter10-6 22:05:41 06/01/13 Very cool!! - Bigwill837 22:06:26 06/01/13 I am scared of you (n/m) - LJZTT 22:07:58 06/01/13 Ha! He's like the automotive Dr Frankenstein... - ForceFedTT (SoCal) 01:10:59 06/02/13 Wait till you see how he works in person.. - KongZTT GT28RS MD 03:39:15 06/02/13 My fuel pump i always on hi, that's now my map sensor input - TTZ2NV(EPTmotorsports) 01:52:45 06/02/13 AThe stealth 340 should be able to handle more than 700 - KongZTT GT28RS MD 04:07:14 06/02/13 Acording to Greg d , aeromotives pulls too many amps for the - ztunerz 08:07:05 06/02/13 The main reason for this FPC mod is to eliminate the FPC as - DVDBURN (MD) 08:52:55 06/02/13 What size fuses would you recommend? (n/m) - toykoz32 13:21:20 06/02/13 Depends on the max continuous current of the fuel pump. - DVDBURN (MD) 23:22:34 06/02/13 this is true -- the documentation is in their manaul - The Devils Z 09:15:15 06/03/13 Simple = better :) (n/m) - ztunerz 08:08:29 06/02/13 If you need 60mm fans I think I have a few dozen laying - BigTDogg (MA) 09:01:03 06/02/13 I just threw a bunch out he could've had too. No one seemed - ZXoltan 10:46:29 06/02/13 Well done Gary! (n/m) - TheTwinZ (Peru) 13:56:20 06/02/13 Cool! All it needs is a washable filter on the fan (n/m) - Ashman2k2 20:00:31 06/02/13
Post a Followup	You cannot reply to this message because you are not logged in.