Subject	there is an unused pin on the ashspec controller
Posted by	aliaZ on December 12, 2012 at 7:04 AM
	This message has been viewed 359 times.
In Reply To	Re: I forget exactly how I worked around this but I think I posted by ouikikazz on December 10, 2012 at 02:00 PM
Message	that can be used for an additional ground to the second pump. I soldered a wire to this pin and haven't had any issues running two stock TT pumps, one on each side of the tank. the ground wire is what comes from the controller. For some strange reason, Nissan decided to modulate the pump output using ground instead of power. This is a PITA, because this prevents you just just grounding the pump to the bulkhead. SZ recommends using a hobbs switch setup which will work fine so long as you don't heavily track the car. in a track setup you either need an external surge tank setup if using a hobbs switch (requires a minimum of three pumps), or a pump on each side of the tank (requires two pumps)
Follow Ups	ash spec dual fuel pump controller issues/danger - DarkZide 14:41:31 12/09/12 What was Ash's feedback on the failure? (n/m) - samsung-Z [Houston] 14:50:13 12/09/12 well Ray the cars owner emailed him or Z1 - DarkZide 15:39:01 12/09/12 that could have potentially caused an explosion (n/m) - WhiTTe Z 16:11:18 12/09/12 that could have potentially caused an explosion (n/m) - WhiTTe Z 15:47:37 12/10/12 that could have potentially caused an explosion (n/m) - WhiTTe Z 16:56:46 12/11/12 If the wiring was the issue, curious why you didn't - Jayru 15:03:49 12/09/12 after discussing this with the guys at Spec Z we decided - DarkZide 15:42:00 12/09/12 I'm confused - Jayru 17:15:58 12/09/12 sorry for the confusion here is what I did - DarkZide 17:26:26 12/09/12 whoa (n/m) - LJZTT 15:05:52 12/09/12 You need to rewire with #10 wire, the existing wire can't - njz 15:44:57 12/09/12 it looks like the pigtails that came with the pumps - aliaZ 17:28:21 12/09/12 Who soldered the two hot wires to the stock connection? - RZturbo 17:41:53 12/09/12 details please? - aliaZ 17:55:25 12/09/12 Yeah thats how it was before, I change that set up as well - DarkZide 18:51:01 12/09/12 I forget exactly how I worked around this but I think I - The Devils Z 18:30:34 12/09/12 Yeah the way I have it only one pump runs at idle - DarkZide 19:08:58 12/09/12 Re: Yeah the way I have it only one pump runs at idle - WazTTed 05:17:22 12/10/12 Re: I forget exactly how I worked around this but I think I - ouikikazz 14:00:09 12/10/12 there is an unused pin on the ashspec controller - aliaZ 07:04:00 12/12/12 so why does ash not put this in his install instructions? (n/m) - DarkZide 11:37:06 12/12/12 good question - aliaZ 17:49:23 12/13/12 I think I just upgraded the ground wire and had no issues. (n/m) - toykoz32 12:19:22 12/11/12 Interested in doing a write up for us? (n/m) - KongZTT GT28RS MD 21:25:07 12/09/12 possibly, I would rather do a write up when I install the - DarkZide 21:56:00 12/09/12 sounds good man - KongZTT GT28RS MD 22:10:27 12/09/12
Post a Followup	You cannot reply to this message because you are not logged in.