| QUANTASEAL NANO COATING 2oz Bottle A Revolutionary Breakthrough in the coatings industry. Quantaseal Nano Coat is not just another clear coat or ceramic coating. Quantaseal Nano Coat is a unique nanocoating that penetrates the substrate and creates a protective barrier. Quantaseal Nano Coat will be the most important coating you will ever use to reveal the luster and extend the life of over 15 different surface types. Quantaseal is ideal for Marine, Automotive, Motorbikes, etc PRODUCT DESCRIPTION- 2oz Bottle QUANTASEAL NANO PROTECTIVE COATING is capable of providing extremely high levels of chemical and thermal protection in very thin films. Formulated using Nanotechnology withstands substrate temperatures over 500f. It will air cure over a period of 24 hours, though it will be dry to the touch and accept reasonable handling in less than 1 hour and may be placed in service after 8 to 10 hours. Maximum protection is achieved after 7 days. Quantaseal requires no surface etch and will bond to extremely smooth surfaces. Simply degrease and apply. The coating cures to a very hard, smooth surface with excellent adhesion and resistance to UV. Quantaseal is solvent based with a very low to no V.O.C. RECOMMENDED USES Quantaseal Nano Coat is primarily designed as a clear ceramic protective coating with excellent chemical and corrosion resistance. It can be apply to any polished metal such as Aluminum, Brass, Bronze, Steel, Stainless Steel, Titanium, Magnesium, Chrome Plating , Glass, Ceramics, Plastics, Rubber, Fiberglass including Flashed Chrome Plastic, Paint and other Polymers. The final film thickness is less than .001”and provides a glass smooth finish. NANOTECHNOLOGY Nanotechnology is the understanding and control of molecules at dimensions between approximately 1 and 100 nanometers. A nanometer is one-billionth of a meter. In reference a sheet of paper is about 100,000 nanometers. 1 nanometer would be equivalent to 1/30,000th the width of a human hair. CHEMICAL RESISTANCE: Excellent TEMPERATURE RESISTANCE:to 600f substrate. FLEXIBILITY: Good WEATHERING: Excellent ABRASION RESISTANCE: N/E SUBSTRATES: May be applied to both ferrous and non-ferrous metals, glass, ceramics, and plastics as well as over other paints and coatings. COLORS: Clear TOPCOAT REQUIRED: None SPECIAL TREATMENT: None COMPATIBILITY WITH OTHER COATINGS: N/E THEORETICAL SOLIDS CONTENT OF MIXED MATERIAL: <30% WT. PRIMER: No primer needed. RECOMMENDED DRY FILM THICKNESS PER COAT: .0003” to .001” THEORETICAL COVERAGE: Varies with thickness. 1 Pint will cover approximately 60-70 sq/ft at 0.23 mil. BURNISHING: None SHELF LIFE:1 year. GLOSS: Clear and imparts a gloss NOT RECOMMENDED FOR:Highly porous surfaces. APPROXIMATE SHIPPING WEIGHT:946gr per L SURFACE PREPARATION All surfaces must be absolutely free of oils, grease, moisture, dust, scale or corrosion. Degrease using a solvent that leaves no residue. DO NOT USE petroleum based solvents. APPLICATION TEMPERATURE Material Surfaces Ambient Normal 18-30ºC 18-30ºC 16-32ºC 64.4F-86F 64.4F-86F 60.8F-89.6F (65-85% Humidity) Minimum 13ºC 13ºC 10ºC 55.4F 55.4F 50F (50% Humidity) Maximum 35ºC 38ºC 38ºC 95F 100.4F 100.4F (95% Humidity) NO MIXING REQUIRED Shake &Stir well MANUAL APPLICATION Apply coating using a clean dry lint free cloth such as a diaper cloth. Moisten your applicator with PSS-900 Nano Coat and apply in overlapping patterns to insure complete coverage and achieve a thickness of .0003” to .0005”.
injection is nice, but I like being blown |
