Subject	Feramic material "welded" itself to the PP
Posted by	jdubs on December 03, 2012 at 10:24 AM
	This message has been viewed 234 times.
In Reply To	Clutch issue RESOLVED! posted by MidLifeZ (DFW) on December 03, 2012 at 10:08 AM
Message	SB clutches have this "feramic" material that can can get hot enough to weld the disc to the PP when slipped hard. You may have gotten away with braking them apart by launching the car a few times. SB actually recommends you try that in this situation. I never had any bad experiences with my SB stage 4 OFE in 10K of using it, but I rarely drove hard.
Follow Ups	Clutch issue RESOLVED! - MidLifeZ (DFW) 10:08:45 12/03/12 Feramic material "welded" itself to the PP - jdubs 10:24:56 12/03/12 Been there, tried that... - MidLifeZ (DFW) 11:22:58 12/03/12 congrats, I've seen one 'welded' so badly there were chunks - vorpalZ 10:43:58 12/03/12 Everyone including myself has been having clutch issues - Krazyd27(Houston) 11:07:17 12/03/12 Speaking of clutches, what's everyone get to the clutch? - Broke_as_**** 11:19:39 12/03/12 Hmm... - TriniTT 12:08:35 12/03/12 Agreed (n/m) - MidLifeZ (DFW) 12:50:25 12/03/12 glad to hear you got it fixed (n/m) - aliaZ 13:16:29 12/03/12 I destroyed one of those too during Zcon :( (n/m) - Piranha 16:53:22 12/03/12 Well can definitely count me out for ever - MidLifeZ (DFW) 18:05:04 12/03/12 I think it's an anomoly, I've used several of their clutches - TriniTT 18:53:36 12/03/12 Which SB clutch did you have? I had a stage 4 that lasted - Mr.Stacy 19:13:31 12/03/12 Got it from Coz, it is the "TZ" model (n/m) - MidLifeZ (DFW) 21:11:51 12/03/12 feramic sucks - aliaZ 20:52:03 12/03/12 Glad you got it figured out, and nice talking to you BUT.... - Joe@ZSpeedperformance 13:48:07 12/04/12 Could be, thanks too for all the time on the phone - MidLifeZ (DFW) 13:59:34 12/04/12 Spring should not have broke by pushing it back all the way - Joe@ZSpeedperformance 14:28:28 12/04/12 RE: Was the snout of the trans worn or gouged in any fashio - MidLifeZ (DFW) 21:17:13 12/04/12
Post a Followup	You cannot reply to this message because you are not logged in.