Subject	I guess a 285/30/18 or a 275/35/18 will allow me to run less
Posted by	Jeffblue on June 11, 2012 at 3:05 PM
	This message has been viewed 386 times.
In Reply To	What? A 10" +43 is pretty much perfect fit on a Z32 posted by BigTDogg (MA) on June 11, 2012 at 02:50 PM
Message	negative camber and therefore help me get more tire on the road than simply having more tire. That being said, which would provide the best straight line traction? 1. 285/35/18 with rolled/cut fender (to prevent outer rubbing) 2. 275/35/18 - narrower tread to prevent rubbing 3. 285/35/18 - thinner sidewall to prevent rubbing I dont mind cutting/rubbing if it is the best performance option. I'm sure the handling on all the choices will be reasonably similar... however i'm willing to sacrifice having a bit more understeer in favor of better straight line traction caused by larger stagger
Follow Ups	need some opinions on my tire setup 255/35/18 + 285/35/18 - Jeffblue 14:28:08 06/11/12 I would run a 275/35/18 in the back but i want to maximize - Jeffblue 14:32:28 06/11/12 285/30 (n/m) - BigTDogg (MA) 14:36:32 06/11/12 with the 285/30 i'm losing so much sidewall i feel like the - Jeffblue 14:47:07 06/11/12 Not the best picture, but there is plenty of meat on a 30 - BigTDogg (MA) 10:13:01 06/12/12 Not to thread jack, but - TheMarlin 11:49:19 06/12/12 Previous owner did it - BigTDogg (MA) 12:07:45 06/12/12 agreed, 285/35 is real tall. (n/m) - Z32TT-R 17:25:39 06/11/12 Your RX7 rims stick out too much in the back... - Oppaman Z 14:48:40 06/11/12 What? A 10" +43 is pretty much perfect fit on a Z32 - BigTDogg (MA) 14:50:49 06/11/12 I guess a 285/30/18 or a 275/35/18 will allow me to run less - Jeffblue 15:05:20 06/11/12 You'll want to roll your fenders regardless. - BigTDogg (MA) 15:09:05 06/11/12 none taken i appreciate the input - Jeffblue 15:24:24 06/11/12 That will be pretty close as you can see.... - Oppaman Z 09:18:37 06/12/12 I think the 10+43 sticks out only 1mm more than the 9.5+38mm - Jeffblue 15:00:56 06/11/12 Keep in mind It also depend of the spokes design... - Oppaman Z 09:27:03 06/12/12 how would the inner clearance be on the front? - Jeffblue 15:06:17 06/11/12 Tire width may vary from different manufacturer... - Oppaman Z 09:34:30 06/12/12 Re: need some opinions on my tire setup 255/35/18 + 285/35/18 - darkmann 15:28:59 06/11/12 That actually helps a lot! - Jeffblue 15:34:57 06/11/12 Re: That actually helps a lot! - darkmann 17:48:54 06/11/12 How is the traction with the 295's - Jeffblue 17:08:37 06/11/12 Rear tires have that stressed (stretched) look though... - Z DNA 08:50:43 06/12/12 subframe spacers + 285/35 (n/m) - ZiNnYc 15:35:15 06/11/12 I run 295's on the same wheels/setup. - JMW300ZX 16:12:50 06/11/12 I ran the same setup and it worked, but the 285/35s are tall - boileralum 21:13:32 06/11/12 I'm on 285/30s on Volk GT-Ps at +45. Rolled for assurance. - HillZTT 11:05:47 06/12/12 Correction... 18x10 at +44 (n/m) - HillZTT 14:00:50 06/12/12 285/30/18 and 255/40/18 - zfreak(Dallas) 13:56:45 06/13/12 why did you decide to up the profile in the front but not - Jeffblue 15:34:01 06/13/12
Post a Followup	You cannot reply to this message because you are not logged in.