Subject	Aux fan isn't going back in since I don't have A/C and
Posted by	PiotrC70 on April 23, 2012 at 9:23 AM
	This message has been viewed 194 times.
In Reply To	Evertyhing looks really clean but how do you plan to fit the posted by Evan(CA) on April 23, 2012 at 12:10 AM
Message	the fuse block will actually sit closer to the center so I can get the cover on. Since I have the Ash planar setup with Selin, and with the 45* sections that go on the pipe to the MAF, it should fit just fine. The fuse block doesn't sit any farther than the aux fan would, just a bit higher. 1993 TT. R.I.P. 09.15.2010
Follow Ups	Some randoms. Oil cooler, wire tuck, and other crazy stuff. - PiotrC70 23:56:02 04/22/12 Evertyhing looks really clean but how do you plan to fit the - Evan(CA) 00:10:24 04/23/12 Aux fan isn't going back in since I don't have A/C and - PiotrC70 09:23:02 04/23/12 The Aux fan doesn't just come on with the A/C - i_s_64 11:05:57 04/23/12 Appreciate the info. I'll have to look at the FSM and see - PiotrC70 11:32:42 04/23/12 Quick search on Google - i_s_64 11:39:05 04/23/12 Above 221 = On, otherwise off. Again, thanks for the info - PiotrC70 13:18:00 04/23/12 Actually, I should post the whole page since it's - i_s_64 11:40:47 04/23/12 Re: Some randoms. Oil cooler, wire tuck, and other crazy stuff. - Evan_Wright (Ca) 00:56:22 04/23/12 a real baller would reroute that fuse block in the glovebox - LJZTT 05:17:27 04/23/12 If I were a real baller I would, but this project is creepin - PiotrC70 09:27:39 04/23/12 Won't that block airflow across the radiator? (n/m) - Boosted1 06:20:19 04/23/12 Not really. No A/C condensor to worry about, so I'm pretty - PiotrC70 09:18:03 04/23/12 Wow, I wouldnt have the patience for all of those wires - z-u-later 07:58:36 04/23/12 Nice! - Jayru 10:51:13 04/23/12 It's only intimidating if you look at all the wires... - PiotrC70 13:26:39 04/23/12 So many wires! (n/m) - gnozahs 13:47:54 04/23/12 Nice, but u might rethink silicone oil lines for the cooler - ZXoltan 17:16:20 04/23/12
Post a Followup	You cannot reply to this message because you are not logged in.