Subject	Enkei RPF1 Fitment
Posted by	NismoZ (Louisville) on February 02, 2012 at 9:12 PM
	This message has been viewed 2805 times.
Message	I’ve been reading the thread on wheel fitment for TTs here. It’s a fantastic knowledgebase. [ http://www.twinturbo.net/net/viewmsg.aspx?forum=technical&msg_id=935775 ] Getting ready to purchase Enkei RPF1s and Hankook RS-3s for a 91TT with an Eibach .75 inch drop and stock brakes. The measurements that are available are: Front: 18x8.5, Offset: 30mm, Backspacing: 5.86" (245/40/18 Tire) Couple choices for rear… Rear: 18x9.5, Offset: 38mm Backspacing: 6.73" (275/35/18/Tire) Rear: 18x9.5, Offset: 45mm Backspacing: 7.01" (275/35/18/Tire) Rear: 18x10, Offset: 38mm Backspacing: 7.00" (285/35/18/Tire) My goal is to make these wheels as flush as they can be without having clearance issues. (isn’t everyone’s?) With this in mind, should I stay away from 18x10s? If I go with 18x9.5s, the 38mm offset would give me correct wheel flushness, right? I’m thinking 45mm would stick out too much. Thanks for the help. It’s always nice to have anyones opinion before dropping 2k on wheels and tires.
Follow Ups	Enkei RPF1 Fitment - NismoZ (Louisville) 21:12:22 02/02/12 I am running RPF1 18 x 10 38mm offset with 275/35/18 - ArubaDave 21:54:26 02/02/12 Re: Looks great - NismoZ (Louisville) 22:06:25 02/02/12 I see you posted them... - NismoZ (Louisville) 22:24:39 02/02/12 Running 18 x 9.5 in the front 255/35/18 - ArubaDave 10:20:10 02/03/12 Re: Running 18 x 9.5 in the front 255/35/18 - NismoZ (Louisville) 15:15:08 02/03/12 Possibly one - new2boost 02:01:54 02/03/12 Any wheel spacers to clear the spokes? - MixManMash 12:18:18 02/03/12 For what it's worth - NismoZ (Louisville) 22:03:38 02/02/12 Re: For what it's worth - BLACKTT3Z 13:17:07 02/03/12 My Z with Enkei RPF1 with 17x9 all 4 wheels +35 offset - fst300zx 13:18:16 02/03/12 Your rear tire profile is too tall. - TriniTT 15:15:05 02/03/12
Post a Followup	You cannot reply to this message because you are not logged in.