Subject	correct >>
Posted by	ztunerz on July 18, 2011 at 10:17 AM
	This message has been viewed 230 times.
In Reply To	isn't plumbing the PCV directly to the breather tube posted by aliaZ on July 18, 2011 at 06:31 AM
Message	thats also true for the standard pcv relocation . Kuah also stated that the standard pcv relocation is ineffective and one needs to pick up off the exhaust valve covers however i have always wondered if that is indeed the case. not sure how to measure it other than putting a sensitive pressure gauge on the valve covers. It also appears that there are galleries connecting the exhaust and intake sides anyway and also the left and right banks via the lower plenum. Maybe the real issue is quickly draining the oil out off the heads like Kuah has on his race motor. Harry Formerly yellowzxtt
Follow Ups	AN fitting foolishness and New-age PCV reroute - LitlElvis 21:48:26 07/17/11 Looks nice! - ZiNnYc 21:59:06 07/17/11 The tubes come from the highest point on the valve cover - LitlElvis 22:15:47 07/17/11 I thought the middle was...now you have peaked my interest.. - ZiNnYc 22:19:36 07/17/11 The front is the highest point but quite honestly - ztunerz 23:40:47 07/17/11 piqued!!!! (n/m) - vulcanrush 21:26:38 07/18/11 sorry (n/m) - ZiNnYc 21:32:51 07/18/11 Looks good, but why not just delete them? (n/m) - Zski 22:06:49 07/17/11 I personally believe the PCV is a worth-while system - LitlElvis 22:23:35 07/17/11 ok (n/m) - Zski 22:32:37 07/17/11 Re: I personally believe the PCV is a worth-while system - preprodigy 23:06:26 07/17/11 Actually >>> - ztunerz 23:35:15 07/17/11 Agreed 100 % (n/m) - ztunerz 23:32:06 07/17/11 I like your design >>> - ztunerz 23:38:39 07/17/11 I'll be using the stock restrictor. - LitlElvis 00:16:27 07/18/11 K (n/m) - ztunerz 00:31:40 07/18/11 That PCV reroute is sweet - Broke_as_**** 00:55:32 07/18/11 Are you moving back anytime soon, or there to stay? (n/m) - LitlElvis 06:34:09 07/18/11 Here to stay? Haha, no, I'm leaving Wisconsin for dead, - Broke_as_**** 07:18:59 07/18/11 F1 is always interesting, but our involvement in Top Fuel - LitlElvis 10:43:01 07/18/11 Well that's quite the brain wave - Broke_as_**** 12:27:06 07/18/11 An observation - ztunerz 01:44:45 07/18/11 The stock system's only restrictors are located in the hoses - LitlElvis 06:37:37 07/18/11 not correct >> - ztunerz 10:11:28 07/18/11 hmmmm... I didn't find any restrictors in my PCV hoses. (n/m) - LitlElvis 10:46:41 07/18/11 I don't think the restrictors were on the early Zs - Dallas DamonZ 16:06:26 07/18/11 Mine had them. (n/m) - Barry (NJ) 21:52:41 07/18/11 AN madness - I love it! Need a new condom though :~O (n/m) - jschrauwen 04:38:49 07/18/11 Question regarding the funtion of your new system. - JMartz 06:24:41 07/18/11 Ahhh, but there is a restrictor in the line hooked to the - LitlElvis 06:42:25 07/18/11 You sir are quite a master welder. Love your - JMartz 06:29:20 07/18/11 Yep, you can get black, blue, silver... - LitlElvis 06:39:59 07/18/11 isn't plumbing the PCV directly to the breather tube - aliaZ 06:31:49 07/18/11 I'm sure there will be some reduced affect, but since - LitlElvis 06:45:10 07/18/11 correct >> - ztunerz 10:17:55 07/18/11 The exhaust connection is not needed. - Woody75 (Denver) 10:32:51 07/18/11 I think it's pretty much the same as the Stillen pcv reroute - Woody75 (Denver) 07:30:51 07/18/11 When you say Stillen, are you referring to the traditional - zgene4 19:24:24 07/18/11 Another reroute. Stillens. - Woody75 (Denver) 20:32:13 07/18/11 thanks (n/m) - zgene4 20:58:28 07/18/11 maybe you could find it and post it for us as i have never - fst300zx 09:24:24 07/19/11 Google "Stillen PCV Race upgrade". (n/m) - Woody75 (Denver) 10:16:12 07/19/11 Here's what I found >>> - LitlElvis 10:44:34 07/19/11 I like the PCV Mod, not so much on the IAV (n/m) - njz 08:08:41 07/18/11 Re: AN fitting foolishness and New-age PCV reroute - CmyZ 08:37:03 07/18/11 I oftem wondered why no one had routed the PCV's - Tektrader69 05:20:20 07/19/11 Lots of people have them routed to the intake valve covers. - Woody75 (Denver) 10:14:40 07/19/11
Post a Followup	You cannot reply to this message because you are not logged in.