| Well You can run a +52 with a 10.5" Rim and as far as 9.5" front thats going to be around +47 you can get more aggressive on the offsets maybe +47 rear and +42 front but seeing as you are going 17" I am not sure about your clearances on your lower control arm. In the past I saw a tool that allowed you to install the tire you are wanting to use and slide the drum back and forth to figure out the perfect offset. I planned on buying on of these tools and using to see if I could fit a 315 in the rear I think it is possible especially in 18" I will see if I can find a link for that tool [ http://www.rimsntires.com/rt_specs.jsp ] Here is a tool you can use to play with some specs. Remember tho tire size will play a big part on whether you will rub or not I am running 18x10 with +42 and 275 tire with no rub. I could probably go as low as 18x10 +37 offset and roll the fender.
|
