Subject	go open your hood and take a look for yourself
Posted by	aliaZ on November 02, 2010 at 8:41 AM
	This message has been viewed 328 times.
In Reply To	Well only time will tell. . . . posted by toykoz32 on November 02, 2010 at 08:23 AM
Message	the driver side DP is maybe a 1/4" from the firewall, and you're wanting to add a V-band flange that is a good 2" deep. On top of that, add a 3" DP with a reasonable bend radius. Unless you take a large hammer to your firewall, it simply won't fit
Follow Ups	Borg Warner T25 EFR Turbo pics - aliaZ 00:04:48 11/02/10 full model lineup - aliaZ 00:15:43 11/02/10 EFR 6758 doesn't look like it is equal to a 3071 (n/m) - toykoz32 00:23:42 11/02/10 I'd wait until you see compressor maps - aliaZ 00:28:17 11/02/10 Even if I seen one, I wouldn't know how to read it :( - toykoz32 03:18:30 11/02/10 Since our cars use two of them, just double the numbers on - cherry 08:37:24 11/02/10 3071 is rated at 480, 6758 rated at looks to be 450 - toykoz32 09:28:55 11/02/10 Stop fronting lol (n/m) - ZiNnYc 09:35:36 11/02/10 ? (n/m) - toykoz32 09:37:27 11/02/10 Don't oversell the maps - Zarcasm(Hfd, CT) 17:05:56 11/02/10 Look at Borg Warner Match-Bot: - not4resaleZ 17:06:39 11/02/10 Re: Look at Borg Warner Match-Bot: - sparkie 10:57:43 11/03/10 I can dig it (n/m) - toykoz32 00:17:32 11/02/10 Like (n/m) - Ashman2k2 00:20:06 11/02/10 will have to check them out next month at the PRI show. - nissanguyz32 00:23:15 11/02/10 Compressor cover? - induetime 00:29:51 11/02/10 dunno - aliaZ 00:35:46 11/02/10 no 300zx option at this time...what can be done to change - ZiNnYc 05:38:21 11/02/10 The photos look like they will work on the Z - toykoz32 07:33:32 11/02/10 I believe FR makes DPs for those applications (n/m) - ZiNnYc 07:42:31 11/02/10 You will more than likly have to make your own - toykoz32 08:00:44 11/02/10 I was reiterating the site info. - ZiNnYc 08:05:56 11/02/10 RB/SR/VG all share the same turbo's sizes from the factory. - toykoz32 08:15:12 11/02/10 lol thanks. (n/m) - ZiNnYc 08:23:49 11/02/10 you mean wait until SZ makes them and the others copy (n/m) - Adam (NoVA) 09:48:50 11/02/10 Very interesting. Gives new meaning to internal wastegate (n/m) - BigTDogg (MA) 07:20:26 11/02/10 I was already thinking about going to V-band with my 3071's - toykoz32 07:38:31 11/02/10 that won't fit on your Z - aliaZ 07:41:19 11/02/10 Im going to have to disagree with you on this - toykoz32 07:57:25 11/02/10 The DS is where you would most likely have issues. (n/m) - ZiNnYc 08:07:21 11/02/10 disagree all you want, but you'd be incorrect - aliaZ 08:13:57 11/02/10 Well only time will tell. . . . - toykoz32 08:23:03 11/02/10 go open your hood and take a look for yourself - aliaZ 08:41:52 11/02/10 Like I said before . . . Only time will tell (n/m) - toykoz32 08:48:05 11/02/10 lol. good luck. I'm done (n/m) - aliaZ 08:56:28 11/02/10 Its not for my car so no luck needed . . . also - toykoz32 09:09:00 11/02/10 He has. (n/m) - Bernie (NoVA) 09:18:25 11/02/10 I doubt it (n/m) - toykoz32 09:24:42 11/02/10 Why would you doubt it? I'm sure he has. (n/m) - collegeboy 09:55:31 11/02/10 Why would he just come out and say so if he had? - toykoz32 10:44:27 11/02/10 Do you whisper to it? or like a sternly worded email? (n/m) - ZiNnYc 11:19:27 11/02/10 Massage * (n/m) - toykoz32 11:59:51 11/02/10 Total Hits: 82,662 (n/m) - Spongerider :) 10:51:11 11/02/10 That has no bearing on what we are talking about. (n/m) - toykoz32 11:38:49 11/02/10 Sure it does. - Spongerider :) 11:56:20 11/02/10 I never said he was BS'n, I Don't agree with what he says - toykoz32 12:04:54 11/02/10 i agree , will not fit unless you to a > 90 deg bend dp - ztunerz 10:06:01 11/02/10 Here is a photo of his work - toykoz32 11:54:56 11/02/10 I can cut out sections of firewall too - the point isn't - Bernie (NoVA) 12:26:42 11/02/10 That must have taken forever to make. Jeebus! - dogpile 13:28:13 11/02/10 Hurts to say; I agree with AliaZ. (n/m) - i-xclr8 15:28:17 11/02/10 Time to make some new manifolds for these .. (n/m) - ArubaDave 15:41:44 11/02/10 Hello Jon (n/m) - aliaZ 16:15:08 11/02/10 Answer your phone jon - voting is over (n/m) - ztunerz 18:56:18 11/02/10 What manifolds? (n/m) - BigTDogg (MA) 19:53:43 11/02/10 Do these turbo have to come with all the goodies or - toykoz32 08:27:55 11/02/10 ohh look no divorced dp :) (n/m) - ztunerz 10:03:13 11/02/10 Yummy, just in time for me to finally swap. (n/m) - RSR 10:20:27 11/02/10 What is that cap (3x bolts) on the compressor for? (n/m) - Whatsagoodword 11:44:54 11/02/10 integrated recirc valve (n/m) - aliaZ 11:56:39 11/02/10 Sweet!....waiting for the compressor maps (n/m) - RobZ32 12:31:08 11/02/10 Wow, that turbine housing is long! Looks like we will need - Wright (Ca) 13:22:04 11/02/10 Fingers crossed that these work out for the Z! (n/m) - timmaz 07:58:59 11/03/10 just had a decent write up on these... - Motormutt 22:43:58 11/03/10 yep, saw that - aliaZ 23:38:39 11/03/10
Post a Followup	You cannot reply to this message because you are not logged in.