Subject	RB/SR/VG all share the same turbo's sizes from the factory.
Posted by	toykoz32 on November 02, 2010 at 8:15 AM
	This message has been viewed 399 times.
In Reply To	I was reiterating the site info. posted by ZiNnYc on November 02, 2010 at 08:05 AM
Message	When I say sizes I mean family they are all T25 I think the smaller size's will bolt on to out mani's but only time will tell. And the down pipes can be made pretty easy. But hopefully someone will come out with a set if these are bolt on for the z.
Follow Ups	Borg Warner T25 EFR Turbo pics - aliaZ 00:04:48 11/02/10 full model lineup - aliaZ 00:15:43 11/02/10 EFR 6758 doesn't look like it is equal to a 3071 (n/m) - toykoz32 00:23:42 11/02/10 I'd wait until you see compressor maps - aliaZ 00:28:17 11/02/10 Even if I seen one, I wouldn't know how to read it :( - toykoz32 03:18:30 11/02/10 Since our cars use two of them, just double the numbers on - cherry 08:37:24 11/02/10 3071 is rated at 480, 6758 rated at looks to be 450 - toykoz32 09:28:55 11/02/10 Stop fronting lol (n/m) - ZiNnYc 09:35:36 11/02/10 ? (n/m) - toykoz32 09:37:27 11/02/10 Don't oversell the maps - Zarcasm(Hfd, CT) 17:05:56 11/02/10 Look at Borg Warner Match-Bot: - not4resaleZ 17:06:39 11/02/10 Re: Look at Borg Warner Match-Bot: - sparkie 10:57:43 11/03/10 I can dig it (n/m) - toykoz32 00:17:32 11/02/10 Like (n/m) - Ashman2k2 00:20:06 11/02/10 will have to check them out next month at the PRI show. - nissanguyz32 00:23:15 11/02/10 Compressor cover? - induetime 00:29:51 11/02/10 dunno - aliaZ 00:35:46 11/02/10 no 300zx option at this time...what can be done to change - ZiNnYc 05:38:21 11/02/10 The photos look like they will work on the Z - toykoz32 07:33:32 11/02/10 I believe FR makes DPs for those applications (n/m) - ZiNnYc 07:42:31 11/02/10 You will more than likly have to make your own - toykoz32 08:00:44 11/02/10 I was reiterating the site info. - ZiNnYc 08:05:56 11/02/10 RB/SR/VG all share the same turbo's sizes from the factory. - toykoz32 08:15:12 11/02/10 lol thanks. (n/m) - ZiNnYc 08:23:49 11/02/10 you mean wait until SZ makes them and the others copy (n/m) - Adam (NoVA) 09:48:50 11/02/10 Very interesting. Gives new meaning to internal wastegate (n/m) - BigTDogg (MA) 07:20:26 11/02/10 I was already thinking about going to V-band with my 3071's - toykoz32 07:38:31 11/02/10 that won't fit on your Z - aliaZ 07:41:19 11/02/10 Im going to have to disagree with you on this - toykoz32 07:57:25 11/02/10 The DS is where you would most likely have issues. (n/m) - ZiNnYc 08:07:21 11/02/10 disagree all you want, but you'd be incorrect - aliaZ 08:13:57 11/02/10 Well only time will tell. . . . - toykoz32 08:23:03 11/02/10 go open your hood and take a look for yourself - aliaZ 08:41:52 11/02/10 Like I said before . . . Only time will tell (n/m) - toykoz32 08:48:05 11/02/10 lol. good luck. I'm done (n/m) - aliaZ 08:56:28 11/02/10 Its not for my car so no luck needed . . . also - toykoz32 09:09:00 11/02/10 He has. (n/m) - Bernie (NoVA) 09:18:25 11/02/10 I doubt it (n/m) - toykoz32 09:24:42 11/02/10 Why would you doubt it? I'm sure he has. (n/m) - collegeboy 09:55:31 11/02/10 Why would he just come out and say so if he had? - toykoz32 10:44:27 11/02/10 Do you whisper to it? or like a sternly worded email? (n/m) - ZiNnYc 11:19:27 11/02/10 Massage * (n/m) - toykoz32 11:59:51 11/02/10 Total Hits: 82,662 (n/m) - Spongerider :) 10:51:11 11/02/10 That has no bearing on what we are talking about. (n/m) - toykoz32 11:38:49 11/02/10 Sure it does. - Spongerider :) 11:56:20 11/02/10 I never said he was BS'n, I Don't agree with what he says - toykoz32 12:04:54 11/02/10 i agree , will not fit unless you to a > 90 deg bend dp - ztunerz 10:06:01 11/02/10 Here is a photo of his work - toykoz32 11:54:56 11/02/10 I can cut out sections of firewall too - the point isn't - Bernie (NoVA) 12:26:42 11/02/10 That must have taken forever to make. Jeebus! - dogpile 13:28:13 11/02/10 Hurts to say; I agree with AliaZ. (n/m) - i-xclr8 15:28:17 11/02/10 Time to make some new manifolds for these .. (n/m) - ArubaDave 15:41:44 11/02/10 Hello Jon (n/m) - aliaZ 16:15:08 11/02/10 Answer your phone jon - voting is over (n/m) - ztunerz 18:56:18 11/02/10 What manifolds? (n/m) - BigTDogg (MA) 19:53:43 11/02/10 Do these turbo have to come with all the goodies or - toykoz32 08:27:55 11/02/10 ohh look no divorced dp :) (n/m) - ztunerz 10:03:13 11/02/10 Yummy, just in time for me to finally swap. (n/m) - RSR 10:20:27 11/02/10 What is that cap (3x bolts) on the compressor for? (n/m) - Whatsagoodword 11:44:54 11/02/10 integrated recirc valve (n/m) - aliaZ 11:56:39 11/02/10 Sweet!....waiting for the compressor maps (n/m) - RobZ32 12:31:08 11/02/10 Wow, that turbine housing is long! Looks like we will need - Wright (Ca) 13:22:04 11/02/10 Fingers crossed that these work out for the Z! (n/m) - timmaz 07:58:59 11/03/10 just had a decent write up on these... - Motormutt 22:43:58 11/03/10 yep, saw that - aliaZ 23:38:39 11/03/10
Post a Followup	You cannot reply to this message because you are not logged in.