Subject	USDM is mounted to the oil tree port.
Posted by	Draker (Eugene, OR) on July 21, 2010 at 1:58 AM
	This message has been viewed 258 times.
In Reply To	Time for a dumb question.... posted by evan_aggie on July 20, 2010 at 10:38 PM
Message	Jspec is under the turbo on the other side. There is a plug with the same thread as the oil pressure sensor. You'll see it. He's talking about oil temp sensors, not pressure. But it could still be mounted in the Jspec location.
Follow Ups	Where to tap the oil pan (Oil temp sensor) - d_flore 21:16:21 07/20/10 just get a oil filter sandwich plate (n/m) - john90zxtt(OH) 21:20:27 07/20/10 thought about it. I would rather just get it done. This - d_flore 21:25:58 07/20/10 2nd (n/m) - CoHPhasor 21:26:35 07/20/10 Also I am sitting here with the oil drained already (n/m) - d_flore 21:28:06 07/20/10 After you tap it - SactoTodd 21:34:57 07/20/10 On a Non-Z, I had a sensor that was the drain plug. - SactoTodd 21:39:01 07/20/10 Same. i just drilled out my drain plug and tapped the middle - dogpile 08:55:31 07/21/10 I thought JDMs had an unused port plugged on the oil tree? (n/m) - evan_aggie 21:50:05 07/20/10 They do. (n/m) - zfreak(Dallas) 21:50:55 07/20/10 I had to use it for oem oil press (n/m) - d_flore 22:32:33 07/20/10 Time for a dumb question.... - evan_aggie 22:38:34 07/20/10 USDM is mounted to the oil tree port. - Draker (Eugene, OR) 01:58:30 07/21/10 >>> - ztunerz 22:37:00 07/20/10 Oh I saw that. I wasnt sure it would work. What size is - d_flore 22:47:57 07/20/10 I used a defi sensor. 1/8 not I believe. Screwed right in (n/m) - ztunerz 01:05:18 07/21/10 1/8 npt (n/m) - ztunerz 08:31:35 07/21/10 I replaced my oil pan plug with a VDO sensor. - Woody75 (Denver) 07:49:05 07/21/10
Post a Followup	You cannot reply to this message because you are not logged in.