Subject	Re: Rebuild Project Kick-off
Posted by	ooofoo on April 19, 2010 at 9:34 AM
	This message has been viewed 213 times.
In Reply To	Rebuild Project Kick-off posted by ZaXxon on April 19, 2010 at 07:50 AM
Message	Very nice. Engine looks clean with the exception of the valve cover leaks. One thing I 'd recommend having the machine shop do is to clear any casting flash from the coolant passages. This will help coolant flow, especially to the rear cylinders. If you remove the freeze plugs you'll be amazed at how much flashing is left over from the factory.
Follow Ups	Rebuild Project Kick-off - ZaXxon 07:50:14 04/19/10 Re: Yes to the crank sprocket washer (n/m) - Forced1(NYC) 08:22:16 04/19/10 Re: Rebuild Project Kick-off - ooofoo 09:34:23 04/19/10 I was planning on doing that myself! There has gotta....... - ZaXxon 09:48:20 04/19/10 There is, it was one of my bookmarks. (n/m) - john90zxtt(OH) 13:34:48 04/19/10 yep.. get some long 9"-12" carbide burrs and a drill or - KongZTT GT28RS MD 14:48:49 04/19/10 I also used the magnet and found it helped to have it - CaliguyPurdue (Selin Design) 16:22:22 04/19/10 Re: I also used the magnet and found it helped to have it - boosted4life 18:21:23 04/19/10
Post a Followup	You cannot reply to this message because you are not logged in.