Subject	That car is well capable of 10's..
Posted by	KongZTT GT28RS MD on April 15, 2010 at 9:59 AM
	This message has been viewed 214 times.
In Reply To	???? on 1/4 mile time posted by Hoppy2 on April 15, 2010 at 09:32 AM
Message	Just practice your 60ft's! Specially that you have the Racelogic, get some Drag radials. I would recommend Mickey Thompson ET Drag radials. (whichever is better for the street, I can't remember the exact name). If you plan on running a FULL SLICK ( I would still stick with Mickey Thompson), make sure you are running skinnies up front so you don't end up wrecking the car if the front tries to track. I would just run your regular fronts you use for DD, and run the MT that is a good stick drag radial that is compatible with street driving. Unless you want to push it to the limits and run skinnies and full slicks. NO, This picture is not photoshopped. It took many times to take this picture. Setting up the timer, shutter speed etc, then jumping on my bike and getting the tire to spin. MySpace for those who have em' AIM:Shawn300zxTT "-Any closeups on the nuts? - zboost(tx) 19:17:53 08/08/05 -Not really something you want to ask another man about... (n/m) - LordZ 19:24:00 08/08/05" "I just took 45 min and scrubbed the heck out of my rear" teambushido(San Diego, CA) 19:24:51 12/11/04 -1991 Stage _ TT 5spd (Upgraded to hell and back) -1990 Super White 2+2 Na Stage 3 Auto (Daily Driver, contemplating selling.. ) -1990 Cherry Red Pearl ,Auto Coupe (Parts car) -1990 11 Sec Eagle Talon Tsi AWD, (SOLD!) -1996 Hyundai Sonata (Given to me for FREE , due to broken timing belt,bent valves.. fixed it myself and its my new DD that gets over 25 mpg! -2004 Honda CBR 600RR (Candy blue, FOR SALE)
Follow Ups	???? on 1/4 mile time - Hoppy2 09:32:31 04/15/10 Three words: Tires and clutch. - Scotts94z32 09:56:18 04/15/10 brand new toyo t1r's 285 wide, my clutch is a weak point - Hoppy2 10:23:33 04/15/10 Crank walk! Think about a twin/tripple disc clutch setup.. - KongZTT GT28RS MD 14:16:24 04/15/10 interesting... will require me to do a little more homework - Hoppy2 16:20:08 04/15/10 From MY experience.. ACT always seemed to be - KongZTT GT28RS MD 17:47:23 04/15/10 I understand.. I have a single disc now, was thinking of - Hoppy2 19:14:22 04/15/10 Sounds good.. Just to be safe.. You can do the clutch - KongZTT GT28RS MD 22:17:21 04/15/10 brand new as in not broken in yet? Those tires are slick - dogpile 15:50:37 04/15/10 yes, 50 miles on them if that!! (n/m) - Hoppy2 15:54:43 04/15/10 Yeah..I'd go put ~900 miles on them real quick - dogpile 16:14:02 04/15/10 well what sent you to TX?? (n/m) - Hoppy2 16:36:32 04/15/10 Girlfriend. - dogpile 16:48:01 04/15/10 I am a huge snowmobiler... I am looking to relocate though. - Hoppy2 19:20:33 04/15/10 FL sucks - I lived in Orlando for a year after CNY before TX - dogpile 08:35:08 04/16/10 I see 2.2 - 2.4s 60' times, and 12.5-12.8s 1/4 mile times. (n/m) - Scotts94z32 09:59:10 04/16/10 That car is well capable of 10's.. - KongZTT GT28RS MD 09:59:32 04/15/10 No 3" exhaust and stock trans = no 10's - The Hawk 23:44:45 04/15/10 what can be done to the trans?? I havent seen alot of - Hoppy2 06:32:02 04/16/10 people have done 11's on stock turbos and 2.5" exhaust.. - KongZTT GT28RS MD 15:25:25 04/16/10 Definitely capable of 10's depending on your driving skill - Dream Z 10:34:15 04/15/10 A dyno sheet and accurate wieght would be much more help. - 1badz32 (MN) 10:35:38 04/15/10 dont have either of those specs yet.. this summer I will (n/m) - Hoppy2 10:47:01 04/15/10 We have almost the same setup... - Letterdawg 11:59:42 04/15/10 car will be tuned on & off meth in the next few weeks... - Hoppy2 12:29:18 04/15/10 remote tuning...cool (n/m) - Atl300zxTT 12:54:22 04/15/10 Just remember.. Don't rely on the meth/water inj - KongZTT GT28RS MD 13:48:51 04/15/10 We had a local member run with a similar HP setup... - ZiNnYc 14:54:20 04/15/10 aquamist 5, injects based on injector duty cycle.. (n/m) - Hoppy2 15:57:50 04/15/10 Re: ???? on 1/4 mile time - TurboZboy 15:40:21 04/15/10
Post a Followup	You cannot reply to this message because you are not logged in.