Subject	noise from interior ac/temp sensor driving me nuts.
Posted by	dialectic on February 06, 2010 at 8:38 PM
	This message has been viewed 133 times.
Message	Hello, I did a few searches on this and the basic tip is to lube the bushings. I then examined the unit and one can't really take it apart to do this (if I'm correct). I thus tried to adjust the exposed flathead axle end of the fan, but that is tigthly screwed into the fan unit. Finally, I carefully sprayed the axle with Wd40; this didn't help either. I then unplugged it, and the ac control didn't work right. Do any of you have any other suggestions. I'm just tempted stop the fan from spinning somehow without unplugging it just so that it stops making that rattling noise at the t-top area. This is irritating the crap out of me. Thanks in advance...
Follow Ups	noise from interior ac/temp sensor driving me nuts. - dialectic 20:38:45 02/06/10 I unplugged mine and everything works fine still. (n/m) - Woody75 (Denver) 21:42:17 02/06/10 Re: I unplugged mine and everything works fine still. - dialectic 21:48:24 02/06/10 When mine was making noise I found that - Barry (NJ) 06:42:58 02/07/10 will do - dialectic 10:22:11 02/07/10 Remove screw and oil the pivots. - Fast300 11:29:18 02/07/10
Post a Followup	You cannot reply to this message because you are not logged in.