Subject	ADR M-Sport mod
Posted by	DAYTONAZ on April 29, 2009 at 10:45 AM
	This message has been viewed 813 times.
Message	I removed the clearcoat with aircraft paint stripper and polished out the lip. BIG difference. Also I removed all the cheap studs that were corroded and peeling. I then epoxied in all SS studs. Next I'm going to run a single red pinstripe around the innere edge where the painted center meets the polished edge. It should really set the wheel off.
Follow Ups	ADR M-Sport mod - DAYTONAZ 10:45:32 04/29/09 got any before pics? (n/m) - Atl300zxTT 10:58:55 04/29/09 None like the afters - DAYTONAZ 15:26:26 04/29/09 sounds like you are doing great. skip the red. (n/m) - AntiHero 11:25:45 04/29/09 Looks good. what compound did you use? paper? wetsand - Firstgearlaunch(Atlanta) 11:45:51 04/29/09 No sanding.. - DAYTONAZ 15:25:06 04/29/09 Blue Magic (n/m) - 91Z32TT 18:20:27 04/29/09 Re: ADR M-Sport mod - 550HPTT 12:26:49 04/29/09 Actually the camera shows more lines from the flash - DAYTONAZ 15:23:04 04/29/09 you can pick up wheel strips on eBay for cheap. - SkiFly01 13:25:11 04/29/09 Thanks for the heads up but... - DAYTONAZ 15:21:18 04/29/09 You're always modding in the old hot rod tradition of making - Gordo 93TT Daytona 15:04:31 04/29/09 Thanks Gordo (n/m) - DAYTONAZ 15:17:38 04/29/09 Good job man, I have the same exact wheels and >>> - racer2fst 06:29:07 04/30/09
Post a Followup	You cannot reply to this message because you are not logged in.