Subject	if something like this was installed, all you would have to
Posted by	itsghoZt on September 14, 2008 at 5:15 PM
	This message has been viewed 88 times.
In Reply To	that's why you could install something like i wastalkingbout posted by itsghoZt on September 14, 2008 at 05:12 PM
Message	do is set your timing to base 15* or wherever your timing is(with a timing light), and set your cas to that position and move on from there.. Or am i just thinking way too much outside the box? b/c all 20+ Z's ive worked on this would cause no problems or mis-interpretation. I think im gonna make up a plate and then go from there and then give some feedback. hows that sound?
Follow Ups	Anyone interested in a "degree marking" plate to mount - itsghoZt 15:30:06 09/14/08 that's silly (n/m) - Guapo 15:54:55 09/14/08 How so? instead of having to mark it with a sharpie - itsghoZt 16:37:15 09/14/08 The CAS may not be in the same position... - scottyfender 16:51:08 09/14/08 yep - aliaZ 16:53:27 09/14/08 that's why you could install something like i wastalkingbout - itsghoZt 17:12:54 09/14/08 if something like this was installed, all you would have to - itsghoZt 17:15:58 09/14/08 that's why im saying that you install this peice - itsghoZt 17:21:43 09/14/08 because you're not reading what actual timing is, just - Guapo 19:07:13 09/14/08 sounds like a bad idea - AntiHero 18:19:31 09/14/08
Post a Followup	You cannot reply to this message because you are not logged in.