Subject	JWT Genie question
Posted by	LJZTT on August 20, 2008 at 9:39 PM
	This message has been viewed 147 times.
Message	I reinstalled my exhaust last night and it gave me a bit of trouble. Once I got the catback on, it was much too high, almost as if the h-pipe was too low, forcing the tips into the bumper. I could NOT figure out what the problem was, everything was bolted in and aligned well but the tips were just too high, the rear-most hangers didn't seem to have any tension at all. I looked over everything and I found that the drivers-side forward-most hanger (nearest the catback/H-pipe connection) was the reason for the catback hanging so high. I disconnected it and the catback returned to its original/normal height. I cannot remember if this hanger was already disconnected or not when I removed everything, but one thing I am sure of is that connecting it results in the catback pushing up under the bumper. So my question is, do any of you other JWT Genie owners (Ahmed, Dustin....anyone) have this same hanger disconnected? I *believe* it might be visible through the left rear wheelwell. The MANtage....be a real man search said you suck (n/m) - Wilks. 01:38:02 09/06/06
Follow Ups	JWT Genie question - LJZTT 21:39:57 08/20/08 I used to have a JWT Genie exhaust - TTFairladyZ 21:48:05 08/20/08 Can the hanger be bent back into position? I installed a - Dave N 21:51:00 08/20/08 No need for pics Dave, thanks but the car is not at my house - LJZTT 22:10:11 08/20/08 If I understood your post correctly, it's the hanger on the - Dave N 22:21:35 08/20/08 It's not the "peg-like" hanger. - LJZTT 22:44:41 08/20/08 I would check the hangers and make sure they are not bent. - mscurfield 21:54:14 08/20/08 It was on perfect (see sig), I took it off, put it in my - LJZTT 22:06:15 08/20/08 Hmmmm? Saw your Sig - mscurfield 22:17:27 08/20/08 my Genie has always fit fine (n/m) - robo (sebring1970) 22:14:38 08/20/08 I'll check tomorrow and let you know, but I'm pretty sure - Dustin 22:17:12 08/20/08 I must have bent it. Can't imagine how, but nevertheless - LJZTT 22:47:47 08/20/08 Re: JWT Genie question - TheOneZ 00:56:20 08/21/08 thanks, it's certain I must have bent it somehow - LJZTT 01:33:39 08/21/08 Re: JWT Genie question - TheOneZ 01:41:01 08/21/08 not in town right now, and i dont remember, sorry (n/m) - Ahmed (Chicago) 06:16:22 08/21/08 one of the h-pipe hangers on mine is disconnected. (n/m) - RedSER13 09:34:41 08/21/08 Bent it up into place, thanks everyone (n/m) - LJZTT 20:02:45 08/21/08
Post a Followup	You cannot reply to this message because you are not logged in.